Home ReviewsRefund
Home/Hyundai/Elantra/Hyundai Elantra V (2010-2014)/Repair manual/Door Locks & Anti-Theft Systems/Smart Key Code Saving (Button): Other
Contents Wiring diagrams Section: Door Locks & Anti-Theft Systems All sections

Smart Key Code Saving (Button): Other Hyundai Elantra V

Door Locks & Anti-Theft Systems 4 illustrations ~359 words

Verification of Vehicle Repair

After a repair, it is essential to verify that the fault has been corrected.

  1. of Key learnt, PCM/ECM status and Smartkey PCM/ECM status.
  2. Select "Diagnostic Trouble Codes (DTCs) " mode and then clear DTC.
  3. Operate the vehicle within the enable condition and monitor the DTC on the GDS.
  4. Are any DTCs present? YES Go to the applicable troubleshooting procedure. NO System is performing to specification at this time.

Scheme 237

Scheme 237: Component Location
Scheme 237: Component Location

After a repair, it is essential to verify that the fault has been corrected.

  1. of Key learnt, ECM status and Smartkey ECM status.
  2. Select "Diagnostic Trouble Codes (DTCs)" mode and then clear DTC.
  3. Operate the vehicle within the enable condition and monitor the DTC on the GDS.
  4. Are any DTCs present? YES Go to the applicable troubleshooting procedure. NO System is performing to specification at this time.

Scheme 238

Scheme 238: Component Location
Scheme 238: Component Location

After a repair, it is essential to verify that the fault has been corrected.

  1. of Key learnt, PCM/ECM status and Smartkey PCM/ECM status.
  2. Select "Diagnostic Trouble Codes (DTCs)" mode and then clear DTC.
  3. Operate the vehicle within the enable condition and monitor the DTC on the GDS.
  4. Are any DTCs present? YES Go to the applicable troubleshooting procedure. NO System is performing to specification at this time.

Scheme 239

Scheme 239: Component Location
Scheme 239: Component Location

After a repair, it is essential to verify that the fault has been corrected.

  1. Connect GDS and check "No. of Key learnt, PCM/ECM status and Smartkey PCM/ECM status.
  2. Select "Diagnostic Trouble Codes (DTCs)" mode and then clear DTC.
  3. Operate the vehicle within the enable condition and monitor the DTC on the GDS.
  4. Are any DTCs present? YES Go to the applicable troubleshooting procedure. NO System is performing to specification at this time.

Scheme 240

Scheme 240: Component Location
Scheme 240: Component Location

After a repair, it is essential to verify that the fault has been corrected.

  1. of Key learnt, PCM/ECM status and Smartkey PCM/ECM status.
  2. Select "Diagnostic Trouble Codes (DTCs)" mode and then clear DTC.
  3. Operate the vehicle within the enable condition and monitor the DTC on the GDS.
  4. Are any DTCs present? YES Go to the applicable troubleshooting procedure. NO System is performing to specification at this time.

More articles — Smart Key Code Saving (Button)