| Application | Preferred | Range |
|---|
| Camber (1) |
| Front | 0 | 1/2 To 1/2 |
| Rear | 2/3 | N/A |
| Caster (1) |
| Front (2) | 2 1/3 | N/A |
| Toe-In (1) |
| Front | 0 | 1/2 To 1/2 |
| Rear | 0 | N/A |
| Steering Axis Inclination (SAI) (1) | 12 1/2 | N/A |
| (1) Measurement in degrees. (2) Specifications for rear angles not available. |
| (1) | Measurement in degrees. |
| (2) | Specifications for rear angles not available. |
WHEEL ALIGNMENT SPECIFICATIONS (ELANTRA)
| Application | Preferred | Range |
|---|
| Camber (1) |
| Front | 0 | 1/2 To 1/2 |
| Rear | 11/16 | 1 To -3/16 |
| Caster (1) |
| Manual Steering |
| Front (2) | 1 | 1/2 To 1 1/2 |
| Power Steering |
| Front | 1 11/16 | 1 3/16 To 2 3/16 |
| Toe-In (1) |
| Front | 1/16 | 1/8 To 5/16 |
| Rear | 0 | N/A |
| Toe-In (3) |
| Front | 1/32 (.8) | 1/16 To 5/32 (-2 To 4) |
| Rear | 0 | N/A |
| Toe-Out On Turns (1) |
| Front (2) |
| Inner | 37 3/8 | N/A |
| Outer | 31 1/2 | N/A |
| Steering Axis Inclination (SAI) (1) | 13 | N/A |
| (1) Measurement in degrees. (2) Specifications for rear angles not available. (3) Measurement in inches (mm). |
| (1) | Measurement in degrees. |
| (2) | Specifications for rear angles not available. |
| (3) | Measurement in inches (mm). |
WHEEL ALIGNMENT SPECIFICATIONS (EXCEL)
| Application | Preferred | Range |
|---|
| Camber (1) |
| Front | 5/32 | 21/32 To 11/32 |
| Rear | 21/32 | 1 5/32 To 5/16 |
| Caster (1) |
| Front (2) |
| Manual Steering | 1 3/32 | 19/32 To 1 19/32 |
| Power Steering | 1 23/32 | 1 7/32 To 2 7/32 |
| Toe-In (1) |
| Front | 1/16 | 3/16 To 5/16 |
| Rear | 0 | N/A |
| Toe-In (3) |
| Front | 1/32 (.8) | 3/32 To 5/32 (-2 To 4) |
| Rear | 0 | N/A |
| Toe-Out On Turns (1) |
| Front (2) |
| Inner | 37 13/32 | N/A |
| Outer | 31 1/2 | N/A |
| Steering Axis Inclination (SAI) (1) | 13 7/32 | N/A |
| (1) Measurement in degrees. (2) Specifications for rear angles not available. (3) Measurement in inches (mm). |
| (1) | Measurement in degrees. |
| (2) | Specifications for rear angles not available. |
| (3) | Measurement in inches (mm). |
WHEEL ALIGNMENT SPECIFICATIONS (SCOUPE)
| Application (1) | Preferred | Range |
|---|
| Camber (2) | 1/2 | 0 To 1 |
| Caster (2) | 2 | 1 1/2 To 2 1/2 |
| Toe-In (2) | 0 | 1/4 To 1/4 |
| Toe-In (3) | 0 | 1/8 To 1/8 (-3 To 3) |
| Toe-Out On Turns (2) |
| Inner | 37 1/8 | N/A |
| Outer | 30 3/16 | N/A |
| Steering Axis Inclination (SAI) (2) | 13 7/16 | N/A |
| (1) Specifications for rear angles not available. (2) Measurement in degrees. (3) Measurement in inches (mm). |
| (1) | Specifications for rear angles not available. |
| (2) | Measurement in degrees. |
| (3) | Measurement in inches (mm). |
WHEEL ALIGNMENT SPECIFICATIONS (SONATA)
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) |
|---|
| Ball Joint Nut | 44-53 (60-72) |
| Centermember End Mounting Bolt | 44-59 (60-80) |
| Centermember-To-Crossmember Bolt | 59-74 (80-100) |
| Front Axle Hub Nut | 148-192 (200-260) |
| Lower Arm Shaft-To-Crossmember Nut | 74-89 (100-120) |
| Lower Control Arm Clamp Bolt |
| Sonata | 59-74 (80-100) |
| Except Sonata | 44-59 (60-80) |
| Lower Control Arm Clamp Nut | 26-35 (35-47) |
| Stabilizer Bar Bracket Bolt |
| Sonata | 22-31 (30-42) |
| Except Sonata | 13-19 (17-26) |
| Strut Assembly-To-Steering Knuckle Nut |
| Elantra | 81-96 (110-130) |
| Except Elantra | 66-77 (90-105) |
| Strut Assembly-To-Body Nut |
| Elantra | 26-33 (35-45) |
| Excel & Scoupe | 18-26 (25-35) |
| Sonata | 11-15 (15-20) |
| Tie Rod End-To-Knuckle |
| Sonata | 18-26 (25-35) |
| Except Sonata | 11-25 (15-34) |
| Wheel Lug Nut | 66-81 (90-110) |
