Home ReviewsRefund
Home/Hummer/H2/Hummer H2 I (2002-2007)/Repair manual/Testing & Diagnostics/Engine Controls - (Introduction) - 4.8L, 5.3L, and 6.0L: Ma…
Contents Wiring diagrams Section: Testing & Diagnostics All sections

Engine Controls - (Introduction) - 4.8L, 5.3L, and 6.0L: Maintenance Hummer H2 I

Testing & Diagnostics

Fuel Tank Draining Procedure

  1. Loosen the fuel filler cap in order to relieve the fuel tank vapor pressure.
  2. Raise the vehicle. Refer to «Lifting and Jacking the Vehicle»(ref-187252-S32674187102005083100000) in General Information.
  3. Loosen the fuel fill hose clamp.
  4. Disconnect the fuel fill hose from the fuel fill pipe.
  5. Use a hand or air operated pump device in order to drain as much fuel through the fuel fill hose as possible.

More articles — Engine Controls - (Introduction) - 4.8L, 5.3L, and 6.0L