Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Brake Hose to Caliper Bolt, Front | 40 N.m | 30 lb ft |
| Brake Hose to Caliper Bolt, Rear | 40 N.m | 30 lb ft |
| Caliper Guide Pin Bolt, Front | 108 N.m | 80 lb ft |
| Caliper Guide Pin Bolt, Rear | 108 N.m | 80 lb ft |
| Caliper Mounting Bracket to Axle Flange Bolt, Rear | 165 N.m | 122 lb ft |
| Caliper Mounting Bracket to Knuckle Bolt, Front | 300 N.m | 221 lb ft |
| Caliper to Caliper Mounting Bracket Bolt, Rear | 165 N.m | 122 lb ft |
Fastener Tightening Specifications
Disc Brake Component Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Front Brakes JH6 | ||
| Rotor Discard Thickness | 36.50 mm | 1.437 in |
| Rotor Minimum Allowable Thickness After Refinish | 37.0 mm | 1.457 in |
| Rotor Thickness - New | 38.0 mm | 1.496 in |
| Rotor Maximum Allowable Assembled Lateral Runout | 0.13 mm | 0.005 in |
| Rotor Maximum Allowable Scoring | 1.50 mm | 0.059 in |
| Rotor Maximum Allowable Thickness Variation | 0.025 mm | 0.001 in |
| Rear Brakes JH6 | ||
| Rotor Discard Thickness | 27.50 mm | 1.083 in |
| Rotor Minimum Allowable Thickness After Refinish | 28.0 mm | 1.102 in |
| Rotor Thickness - New | 29.0 mm | 1.142 in |
| Rotor Maximum Allowable Assembled Lateral Runout | 0.13 mm | 0.005 in |
| Rotor Maximum Allowable Scoring | 1.50 mm | 0.059 in |
| Rotor Maximum Allowable Thickness Variation | 0.025 mm | 0.001 in |
| *All brake rotors have a discard dimension cast into them. Replace any rotor that does not meet this specification. After refinishing the rotor, replace any rotor that does not meet the minimum thickness specifications. | ||
Disc Brake Component Specifications