FLUID CAPACITIES
The following refill capacities given are approximate. Correct fluid level should always be determined by marks on dipstick, rather than amount of fluid added. DO NOT overfill. See TRANSMISSION FLUID CAPACITIES table.
| Application | Refill - Qts. (L) | Dry Fill - Qts. (L) |
|---|---|---|
| 4L65-E | 5.0 (4.7) | 11 (10.6) |
TRANSMISSION FLUID CAPACITIES
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) |
|---|---|
| Auxiliary Oil Cooler Support Bolt | 12 (16) |
| Catalytic Converter Guard Bolts | 22 (30) |
| Catalytic Converter Nuts | 37 (50) |
| Engine Protection Shield Bolts | 22 (30) |
| Exhaust Manifold Pipe-To-Catalytic Converter Nuts | 37 (50) |
| Extension Housing Bolts | 33 (45) |
| Heat Shield Bolts | 13 (18) |
| Insulator Nuts | 12 (16) |
| Oil Pan Bolts | 12 (16) |
| Oil Pan Drain Plug | 13 (18) |
| Oxygen Sensor | 31 (42) |
| Park Lock Bracket Bolt | 18 (24) |
| Park/Neutral Position Switch Bolt | 18 (24) |
| Reverse Servo Cover Bolt | 18 (24) |
| Right Exhaust Pipe Nuts | 37 (50) |
| Shift Cable Bracket Bolts | 18 (24) |
| Transmission Control Lever Nut | 18 (24) |
| Transmission Crossmember Bolts & Nuts | 70 (95) |
| Transmission Heat Shield Bolts | 13 (18) |
| Transmission Fluid Cooler Hose Insulator | 12 (16) |
| Transmission Oil Level Indicator Tube Nut | 13 (18) |
| Transmission Mount Bolts | 44 (60) |
| Transmission Mount Nut | 30 (40) |
| INCH Lbs. (N.m) | |
| Accumulator-To-Case Bolt | 97 (11) |
| Center Console Bolts | 80 (9) |
| Center Console End Panel Screws | 14 (1.6) |
| Center Console Storage Bin Screws | 18 (2) |
| Control Valve Body Bolts | 97 (11) |
| Filler Tube Bolt | 53 (6) |
| Fluid Pressure Switch | 97 (11) |
| Manual Detent Spring Bolt | 97 (11) |
| Oil Pass Cover Bolt | 97 (11) |
| Pressure Control Solenoid Bolt | 97 (11) |
| Shift Cable Brace Bolt | 89 (10) |
| Shift Handle Set Screw | 18 (2) |
| TCC Solenoid Bolts | 97 (11) |
| Transmission Fluid Indicator Stop Bolt | 97 (11) |
| Valve Body-To-Case Bolt (1) | 97 (11) |
| Vent Tube Clamp | 89 (10) |
| VSS Bolt | 97 (11) |
| (1) Tighten valve body bolts in a spiral pattern starting in center of valve body. | |
| (1) | Tighten valve body bolts in a spiral pattern starting in center of valve body. |
TORQUE SPECIFICATIONS