Ignition Switch Honda S2000 AP1

Test

SRS components are located in this area. Review the SRS component locations, (see COMPONENT LOCATION INDEX ) and PRECAUTIONS AND PROCEDURES ) before performing repairs or service.

Scheme 1

Scheme 2

1. Make sure you have the anti-theft code for the radio, then write down the frequencies for the radio's preset buttons.
2. Disconnect the battery negative cable.
3. Disconnect the 7P connector from the under-dash fuse/relay box.
4. Check for continuity between the terminals in each switch position according to the table below.
5. If the continuity checks do not agree with the table, replace the electrical switch.