Wipers/washers: Other Honda Ridgeline I рестайлинг

Windshield

Wiper Arms Park Position

Scheme 26

1. Turn the wiper switch ON, and then OFF.
2. When the wiper arms stop at the park (automatic stop) position, confirm that they are at the standard position. Position at about 47 mm (1.8 in) from the top of cowl cover (A) Position at about 50 mm (1.9 in) from the top of cowl cover (A) Washer nozzle position
3. When you turn on the washers, confirm 50 % or more of the washer fluid lands within the spray area. If the spray area is not within the standard positions, adjust the nozzles. Position at about 37.5 mm (1.5 in) from the top of the black ceramic area (B) at the lower windshield Position at about 37.5 mm (1.5 in) from the top of the black ceramic area (B) at the lower windshield Position at about 311 mm (12.2 in) from the windshield center line (C) Position at about 311 mm (12.2 in) from the windshield center line (C)

Scheme 27

1. Remove the right inner fender (see «FRONT INNER FENDER REPLACEMENT»(ref-336499-S21546916692009072700000) ).
2. Remove the washer nozzles and clip, then remove the tubes.