Home ReviewsRefund
Home/Honda/Pilot/Honda Pilot II (2008-2011)/Repair manual/Communication Devices/DTC B1002: MICU Internal Error (EEPROM Error)
Contents Wiring diagrams Section: Communication Devices All sections

DTC B1002: MICU Internal Error (EEPROM Error) Honda Pilot II

Communication Devices

Note. If you are troubleshooting multiple DTCs, be sure to follow instructions in B-CAN System Diagnosis Test Mode A (see TROUBLESHOOTING - B-CAN SYSTEM DIAGNOSIS TEST MODE A ).

  1. Clear the DTCs with the HDS.
  2. Turn the ignition switch to LOCK (0) and then back to ON (II).
  3. Wait for 6 seconds or more.
  4. Check for DTCs with the HDS.

Is DTC B1002 indicated?

YES - Faulty MICU, replace the under-dash fuse/relay box (see REMOVAL AND INSTALLATION ).

NO - Intermittent failure, the system is OK at this time.

More articles — Multiplex Integrated Control System