Home/Honda/Pilot/Honda Pilot I (2002-2005)/Repair manual/Wheel Alignment/Wheel Alignment Specifications & Procedures: Specifications

Contents

Wiring diagrams Section: Wheel Alignment

All sections

Wheel Alignment Specifications & Procedures: Specifications Honda Pilot I

Wheel Alignment

TORQUE SPECIFICATIONS

Application	Ft. Lbs. (N.m)
Front Damper Pinch Bolts	116 (157)
Rear Toe Adjusting Bolt Lock Nut	61 (83)
Tie Rod Lock Nut	33 (44)
Wheel Lug Nuts	80 (108)

TORQUE SPECIFICATIONS

Application		Preferred	Range
Camber (1)
Front		.5	1.5 To .5
Rear		.5	1.25 To .25
Caster (1)		1.88	.88 To 2.88
Toe-In (1)
Front		0	.16 To .16
Rear		0	.16 To .16
Toe-In (2)
Front		0 (0)	.08 (-2) To .08 (2)
Rear		0 (0)	.08 (-2) To .08 (2)
Toe-Out On Turns (1)
Inner		38.13	N/A
Outer		30.32	N/A
Turning Angle (1)
Inward Wheel		38.13	N/A
Outward Wheel		30.32	N/A
(1) Measurement in degrees. (2) Measurement in inches (mm).

(1)	Measurement in degrees.

(2)	Measurement in inches (mm).

WHEEL ALIGNMENT SPECIFICATIONS