Contents Wiring diagrams Section: Ignition Switch/steering Lock All sections

Power Steering: Other Honda Pilot I

Ignition Switch/steering Lock 3 illustrations ~169 words

Power Assist Check

Note. This test should be done with original equipment tires and wheels at the correct tire pressure.

Scheme 146

Scheme 146: Power Assist Check
  1. Check the power steering fluid level (see «Fluid Replacement»(ref-174024-S30595022252005041500000) ) and pump belt tension (see «PUMP BELT INSPECTION & ADJUSTMENT»(ref-174024-S14356978832005041500000) ).
  2. Start the engine, let it idle, and turn the steering wheel from lock-to-lock several times to warm up the fluid.
  3. Attach a commercially available spring scale to the steering wheel. With the engine idling and the vehicle on a clean, dry floor, pull the scale as shown and read it as soon as the tires begin to turn. If the scale reads no more than 29 N (3.0 kgf, 6.6 lbf) the gearbox and pump are OK. If the scale reads more than 29 N (3.0 kgf, 6.6 lbf) check the gearbox and pump.

Scheme 147

Scheme 147: Steering Linkage & Gearbox Inspection

Exploded View

Replace the pump as an assembly if the parts indicated with asterisk (*) are worn or damaged.

Scheme 148

Scheme 148: Exploded View

Special Tools Required

Universal holder 07725-0030000