Repair manual
Honda Element YH2 facelift Repair Manual
Step-by-step repair and maintenance instructions for the Honda Element YH2 facelift (2006–2008): removal, installation, adjustment, diagnostics and parameter checks with illustrations.
- Enable Conditions
- Malfunction Threshold
- Confirmation Procedure with the HDS
- Driving Pattern
- Conditions for illuminating the MIL
- Conditions for clearing the MIL
- Conditions for illuminating the fuel fill cap caution
- Conditions for clearing the fuel fill cap caution
- Conditions for illuminating the indicator
- Disconnecting
- Connecting
- GA-Net Bus Configuration
- USB Adapter
- USB Function
- USB Device Requirements
- Reconnecting the USB Device
- USB Music Search
- Muting Logic
- Self-Diagnostic Function
- Error Codes
- CD Error Codes
- XM Error Codes
- USB Error Codes (With Navigation)
- Poor AM or FM Radio Reception Or Interference (With Navigation)
- Poor AM Or FM Radio Reception Or Interference (Without Navigation With XM)
- Poor AM Or FM Radio Reception Or Interference (Without XM)
- No Sound Is Heard From Speaker(s) (Display Is Normal) (With Navigation)
- No Sound Is Heard From Speaker(s) (Display Is Normal) (Without Navigation)
- Auxiliary Input Sound Is Low Or Cannot Be Heard
- Radio Preset Memory Is Lost
- Volume Does Not Change
- Volume Does Not Increase With Speed (With Navigation)
- Volume Is Too High Or Too Low When Driving At Freeway Speeds (With Navigation)
- Radio Tuner Does Not Change Stations
- Navigation Unit Button Illumination Does Not Work (With Navigation)
- Display Does Not Dim Or Brighten With Dimmer (Without Navigation)
- USB Input Sound Is Low Or Cannot Be Heard (With Navigation)
- USB Device Does Not Function (With Navigation)
- Error Code: XM NO SIGNAL or XM ANTENNA Is Displayed
- XM Radio Display Is Blank And No Station Information Is Displayed (With Navigation)
- XM Radio Display Is Blank And No Station Information Is Displayed (Without Navigation)
- XM Radio Preset Memory Is Lost
- Left/Right Channel ID
- Frequency Sweep
- Sound Judging
- Under-Dash Fuse/relay Box
- Engine Electrical (Special Tools)
- Battery
- Relays
- Body Electrical (General Troubleshooting)
- Relay and Control Unit Locations
- Power Distribution (Fuse ID)
- Ground Distribution
- Accessory Power Sockets
- Connectors and Harnesses
- Fuse/relay Boxes
- Under-Hood Fuse/relay Box
- Battery Cable Reset
- Engine Performance Diagnostic Routine Outline - General Information
- Engine Performance Safety Precautions
- Parasitic Load Explanation & Test Procedures - General Information
- Waveforms - Injector Pattern Tutorial - General Information
- Electrostatic Discharge Warning - General Information
- State Emission Standards - Diesel
- Diagnostic Trouble Code Definitions - General Information
- Intermittent Failures
- Opens and Shorts
- If the MIL Did Not Stay On
- HDS Clear Command
- Learn Procedure (Without the HDS)
- OBD Status
- Electronic Control System
- Fail-safe Function
- MIL Bulb Check and Readiness Code Condition
- Self Shut Down (SSD) Mode
- PGM-FI System
- Air Conditioning (A/C) Compressor Clutch Relay
- Air Fuel Ratio (A/F) Sensor
- Barometric Pressure (BARO) Sensor
- Camshaft Position (CMP) Sensor B
- Crankshaft Position (CKP) Sensor
- Engine Coolant Temperature (ECT) Sensors 1 and 2
- Ignition Timing Control
- Injector Timing and Duration
- Knock Sensor
- Malfunction Indicator Lamp (MIL) Indication (In relation to Readiness Codes)
- Manifold Absolute Pressure (MAP) Sensor
- Mass Air Flow (MAF) Sensor/Intake Air Temperature (IAT) Sensor
- Output Shaft (Countershaft) Speed Sensor
- Secondary Heated Oxygen Sensor (Secondary HO2S)
- Electronic Throttle Control System
- Accelerator Pedal Position (APP) Sensor
- Throttle Body
- Camshaft Position (CMP) Sensor A
- Idle Control System
- Brake Pedal Position Switch
- Power Steering Pressure (PSP) Switch
- Fuel Cutoff Control
- Fuel Pump Control
- PGM-FI Main Relay l and 2
- Intake Air System
- Intake Air Bypass Control Thermal Valve
- Three Way Catalytic Converter (TWC)
- Positive Crankcase Ventilation (PCV) System
- Evaporative Emission (EVAP) Control System
- EVAP Canister
- EVAP Canister Purge Valve
- Fuel Tank Pressure (FTP) Sensor
- EVAP Canister Vent Shut Valve
- Fuel Cap Warning Message
- First Drive Cycle
- Procedure
- Electronic Throttle Control System Diagram
- Evaporative Emission (EVAP) Control Diagram
- Catalytic Converter Monitor and Readiness Code
- Enable Criteria
- Evaporative Emission (EVAP) Control System Monitor and Readiness Code
- Air Fuel Ratio (A/F) Sensor Monitor and Readiness Code
- Air Fuel Ratio (A/F) Sensor Heater Monitor Readiness Code
- Misfire Monitor and Readiness Code
- Fuel System Monitor and Readiness Code
- Comprehensive Component Monitor and Readiness Code
- A/C System Inspection
- How to Retrieve a DTC
- DTC Troubleshooting Index
- Symptom Troubleshooting Index
- A/C Condenser Fan Circuit Troubleshooting
- Radiator and A/C Condenser Fan Common Circuit Troubleshooting
- A/C Compressor Clutch Circuit Troubleshooting
- A/C Pressure Switch Circuit Troubleshooting
- Air Mix Control Motor Test
- Mode Control Motor Test
- Performance Test
- General Precautions
- Airbag Handling and Storage
- SRS Unit, Front and Side Impact Sensors, Driver's Seat Position Sensor, Front Passenger's Weight Sensors, Roll Rate Sensor, and Rear Safing Sensor
- Spring-loaded Lock Connector
- Disconnecting
- Connecting
- Seats With Side Airbags
- Precautions
- ODS Unit Initialization
- Airbags
- Front Passenger's Weight Sensors
- Driver's Seat Position Sensor
- Roll Rate Sensor
- Rear Safing Sensor
- SRS indicator stays on, but no DTCs are stored
- Checking and Adjusting the Headliner/Pillar Trim Overlap
- Airbag and Tensioner Disposal
- Deploying Airbags in the Vehicle
- Deploying Components Out of the Vehicle
- Disposal of Damaged Components
- Deployment Tool Check
- Opening the SRS Unit Shorting Connectors for Diagnosis
- DTC (Diagnostic Trouble Codes)
- Reading the DTC
- Clear the DTC Memory With the HDS
- Clear the DTC Memory Using MES Connector Without the HDS
- Troubleshooting Intermittent Failures
- DTC Troubleshooting Index
- Symptom Troubleshooting Index
- DTC Troubleshooting — Part 1
- DTC Troubleshooting — Part 2
- Component Replacement/Inspection After Deployment