Home ReviewsRefund
Home/Honda/CR-V/Honda CR-V III рестайлинг (2009-2012)/Repair manual/Communication Devices/DTC B1002: MICU Internal Error (EEPROM)
Contents Section: Communication Devices All sections

DTC B1002: MICU Internal Error (EEPROM) Honda CR-V III рестайлинг

Communication Devices ~117 words

Note. If you are troubleshooting multiple DTCs, be sure to follow the instructions in B-CAN System Diagnosis Test Mode A (see TROUBLESHOOTING - B-CAN SYSTEM DIAGNOSIS TEST MODE A ).

  1. Clear the DTCs with the HDS.
  2. Turn the ignition switch to LOCK (0), and then back to ON (II).
  3. Wait for at least 6 seconds.
  4. Check for DTCs with the HDS. Is DTC B1002 indicated? YES -Faulty MICU; replace the under-dash fuse/relay box (see «REMOVAL AND INSTALLATION»(ref-371395-S18403628942010091000000) ). NO -Intermittent failure, the MICU is OK at this time. Check for loose or poor connections. If the connections are good, check the battery condition (see «BATTERY TEST»(ref-371357-S38076907072010091000000) ) and the charging system.

More articles — Multiplex Integrated Control System