Home ReviewsRefund
Home/Honda/CR-V/Honda CR-V II рестайлинг (2004-2006)/Repair manual/Ignition Switch/steering Lock/Ignition Switch
Contents Section: Ignition Switch/steering Lock All sections

Ignition Switch Honda CR-V II рестайлинг

Ignition Switch/steering Lock 2 illustrations

Test

SRS components are located in this area. Review the SRS component locations (see COMPONENT LOCATION INDEX ) and precautions and procedures (see PRECAUTIONS AND PROCEDURES ) before performing repairs or servicing.

Scheme 1

Scheme 1: Test
Scheme 1: Test

Scheme 2

Scheme 2
Scheme 2
  1. Remove the driver's dashboard lower cover (see «DRIVER'S DASHBOARD LOWER COVER REMOVAL/INSTALLATION»(ref-219396-S35205952782006021400000) ).
  2. Disconnect the 5P connector (A) from the under dash fuse/relay box.
  3. Check for continuity between the terminals in each switch position according to the table.
  4. If the continuity checks do not agree with the table, replace the steering lock assembly (see «STEERING LOCK REPLACEMENT»(ref-219385-S00691942922006021400000) ).