| CAUTION | Do not allow coolant to spill on electrical parts or vehicle paint. If coolant spills, rinse with water immediately. |
- Set heater controls to maximum heat. Ensure radiator drain plug is tight. Ensure engine block coolant drain plug (located next to exhaust manifold) is tightened to specification. See «TORQUE SPECIFICATIONS»(ref-8296-S28879535012000082200000) .
- Fill cooling system with a 50/50 mixture of coolant and water to bottom of radiator filler neck. With radiator cap off, start and operate engine until cooling fan comes on at least twice. Stop engine. Add coolant as necessary to fill radiator to bottom of filler neck. Install radiator cap, start engine and check for leaks.