DTC 67: Torque Sensor I/F Circuit
- Clear the DTC.
- Start the engine.
- Turn the steering wheel from lock-to-lock several times, and wait 10 seconds or more. Does the EPS indicator come on? YES: Go to step 4. NO: The system is OK at this time.
- Stop the engine, and verify the DTC. Is DTC 67 indicated? YES: Check for loose or poor connections at the EPS control unit. If the connections are good, substitute a known-good EPS control unit. If the symptom/indication goes away, replace the original EPS control unit and recheck. NO: Perform the appropriate troubleshooting for the code indicated.