3.8L V6, (VIN A) CARBURETOR NO. 17080491
| Application | Specification |
|---|
| Engine |
| TPS | .97 Volts, High step of fast idle cam. |
| ISC |
| Min. | 450, In Drive. |
| Max. | 900, In Drive. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | 4 1/2 |
| Vacuum Break |
| Primary | 21° |
| Secondary | 35° |
| (1) Set rich stop screw at 4/32". Set air bleed at 1.756. |
| (1) | Set rich stop screw at 4/32". Set air bleed at 1.756. |
3.8L V6, (VIN A) CARBURETOR NO. 17080491
3.8L V6, (VIN A) CARBURETOR NO. 17080496
| Application | Specification |
|---|
| Engine |
| TPS | .97 Volts, High step of fast idle cam. |
| ISC |
| Min. | 450, In Drive. |
| Max. | 900, In Drive. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | 4 1/2 |
| Vacuum Break |
| Primary | 21° |
| Secondary | 33° |
| (1) Set rich stop screw at 4/32". Set air bleed at 1.756. |
| (1) | Set rich stop screw at 4/32". Set air bleed at 1.756. |
3.8L V6, (VIN A) CARBURETOR NO. 17080496
3.8L V6, (VIN A) CARBURETOR NO. 17080498
| Application | Specification |
|---|
| Engine |
| TPS | .97 Volts, High step of fast idle cam. |
| ISC |
| Min. | 450, In Drive. |
| Max. | 900, In Drive. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | 4 1/2 |
| Vacuum Break |
| Primary | 21° |
| Secondary | 33° |
| (1) Set rich stop screw at 4/32". Set air bleed at 1.756. |
| (1) | Set rich stop screw at 4/32". Set air bleed at 1.756. |
3.8L V6, (VIN A) CARBURETOR NO. 17080498
3.8L V6, (VIN K) CARBURETOR NO. 17081130
| Application | Specification |
|---|
| Engine |
| TPS | .41 Volts, ISC retracted at slow idle. |
| ISC |
| Min. | 500, In Drive. |
| Max. | 750, In Drive. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | 5 |
| Vacuum Break |
| Primary | 25° |
| Secondary | N/A |
| (1) Set rich stop screw at 4/32". Set air bleed at 1.756. |
| (1) | Set rich stop screw at 4/32". Set air bleed at 1.756. |
3.8L V6, (VIN K) CARBURETOR NO. 17081130
3.8L V6, (VIN K) CARBURETOR NO. 17081131
| Application | Specification |
|---|
| Engine |
| TPS | .41 Volts, ISC retracted at slow idle. |
| ISC |
| Min. | 600 |
| Max. | 1500 |
| Idle Mixture |
| Lean Screw | 1.304 |
| Idle Screw | 5 |
| Vacuum Break |
| Primary | 25° |
| Secondary | N/A |
3.8L V6, (VIN K) CARBURETOR NO. 17081131
3.8L V6, (VIN K) CARBURETOR NO. 17081132 (W/AC)
| Application | Specification |
|---|
| Engine |
| TPS | .41 Volts, ISC retracted at slow idle. |
| ISC |
| Min. | 500, In Drive. |
| Max. | 800, In Drive, With A/C off. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | 5 |
| Vacuum Break |
| Primary | 25° |
| Secondary | N/A |
| (1) Set rich stop screw at 4/32". Set air bleed at 1.756. |
| (1) | Set rich stop screw at 4/32". Set air bleed at 1.756. |
3.8L V6, (VIN K) CARBURETOR NO. 17081132 (W/AC)
3.8L V6, (VIN K) CARBURETOR NO. 17081133 W/AC
| Application | Specification |
|---|
| Engine |
| TPS | .41 Volts, ISC retracted at slow idle. |
| ISC |
| Min. | 600 |
| Max. | 1100, In Drive, With A/C off. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | 5 |
| Vacuum Break |
| Primary | 25° |
| Secondary | N/A |
| (1) Set rich stop screw at 4/32". Set air bleed at 1.756. |
| (1) | Set rich stop screw at 4/32". Set air bleed at 1.756. |
3.8L V6, (VIN K) CARBURETOR NO. 17081133 (W/AC)
3.8L V6, (VIN K) CARBURETOR NO. 17081134
| Application | Specification |
|---|
| Engine |
| TPS | .41 Volts, ISC retracted at slow idle. |
| ISC |
| Min. | 500, In Drive. |
| Max. | 750, In Drive. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | 5 |
| Vacuum Break |
| Primary | 25° |
| Secondary | N/A |
| (1) Set rich stop screw at 4/32". Set air bleed at 1.756. |
| (1) | Set rich stop screw at 4/32". Set air bleed at 1.756. |
3.8L V6, (VIN K) CARBURETOR NO. 17081134
3.8L V6, (VIN K) CARBURETOR NO. 17081136 (W/AC)
| Application | Specification |
|---|
| Engine |
| TPS | .41 Volts, ISC retracted at slow idle. |
| ISC |
| Min. | 500, In Drive. |
| Max. | 800, In Drive, With A/C off. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | 5 |
| Vacuum Break |
| Primary | 25° |
| Secondary | N/A |
| (1) Set rich stop screw at 4/32". Set air bleed at 1.756. |
| (1) | Set rich stop screw at 4/32". Set air bleed at 1.756. |
3.8L V6, (VIN K) CARBURETOR NO. 17081136 (W/AC)
4.4L V8, (VIN J) CARBURETOR NO. 17081138
| Application | Specification |
|---|
| Engine |
| TPS | .51 Volts, ISC retracted at slow idle. |
| ISC |
| Min. | ISC not used. |
| Max. | ISC not used. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | 5 |
| Vacuum Break |
| Primary | 25° |
| Secondary | N/A |
| (1) Set rich stop screw at 4/32". Set air bleed at 1.756. |
| (1) | Set rich stop screw at 4/32". Set air bleed at 1.756. |
4.4L V8, (VIN J) CARBURETOR NO. 17081138
4.4L V8, (VIN J) CARBURETOR NO. 17081140
| Application | Specification |
|---|
| Engine |
| TPS | .51 Volts, ISC retracted at slow idle. |
| ISC |
| Min. | ISC not used. |
| Max. | ISC not used. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | 5 |
| Vacuum Break |
| Primary | 25° |
| Secondary | N/A |
| (1) Set rich stop screw at 4/32". Set air bleed at 1.756. |
| (1) | Set rich stop screw at 4/32". Set air bleed at 1.756. |
4.4L V8, (VIN J) CARBURETOR NO. 17081140
4.3L V8, (VIN S) CARBURETOR NO. 17081160
| Application | Specification |
|---|
| Engine |
| TPS | .41 Volts, ISC retracted at slow idle. |
| ISC |
| Min. | 400, In Drive. |
| Max. | 1200, With A/C off. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | 3 3/4 |
| Vacuum Break |
| Primary | 24° |
| Secondary | 35° |
| (1) Set rich stop screw at 4/32". Set air bleed at 1.756. |
| (1) | Set rich stop screw at 4/32". Set air bleed at 1.756. |
4.3L V8, (VIN S) CARBURETOR NO. 17081160
3.8L V6, (VIN A) CARBURETOR NO. 17081190
| Application | Specification |
|---|
| Engine |
| TPS | .97 Volts, High step of fast idle cam. |
| ISC |
| Min. | 450, In Drive. |
| Max. | 900, In Drive. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | 4 3/4 |
| Vacuum Break |
| Primary | 21° |
| Secondary | 31° |
| (1) Set rich stop screw at 4/32". Set air bleed at 1.756. |
| (1) | Set rich stop screw at 4/32". Set air bleed at 1.756. |
3.8L V6, (VIN A) CARBURETOR NO. 17081190
3.8L V6, (VIN A) CARBURETOR NO. 17081191 (W/M/T)
| Application | Specification |
|---|
| Engine |
| TPS | .97 Volts, High step of fast idle cam. |
| ISC |
| Min. | Preset at 3 turns. Adjust if necessary. |
| Max. | Preset at 3 turns. Adjust if necessary. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | 2 1/4 |
| Vacuum Break |
| Primary | 28° |
| Secondary | 24° |
| (1) Set rich stop screw at 4/32". Set air bleed at 1.756. |
| (1) | Set rich stop screw at 4/32". Set air bleed at 1.756. |
3.8L V6, (VIN A) CARBURETOR NO. 17081191 (W/M/T)
2.8L V6, (VIN A) CARBURETOR NO. 17081192
| Application | Specification |
|---|
| Engine |
| TPS | .97 Volts, High step of fast idle cam. |
| ISC |
| Min. | 450, In Drive. |
| Max. | 900, In Drive. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | 3 |
| Vacuum Break |
| Primary | 28° |
| Secondary | 24° |
| (1) Set rich stop screw at 4/32". Set air bleed at 1.756. |
| (1) | Set rich stop screw at 4/32". Set air bleed at 1.756. |
2.8L V6, (VIN A) CARBURETOR NO. 17081192
2.8L V6, (VIN A) CARBURETOR NO. 17081193
| Application | Specification |
|---|
| Engine |
| TPS | .97 Volts, High step of fast idle cam. |
| ISC |
| Min. | 450, In Drive. |
| Max. | 900, In Drive. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | 4 3/4 |
| Vacuum Break |
| Primary | 21° |
| Secondary | 31° |
| (1) Set rich stop screw at 4/32". Set air bleed at 1.756. |
| (1) | Set rich stop screw at 4/32". Set air bleed at 1.756. |
2.8L V6, (VIN A) CARBURETOR NO. 17081193
3.8L V6, (VIN A) CARBURETOR NO. 17081194
| Application | Specification |
|---|
| Engine |
| TPS | .97 Volts, High step of fast idle cam. |
| ISC |
| Min. | 450, In Drive. |
| Max. | 900, In Drive. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | 2 3/4 |
| Vacuum Break |
| Primary | 21° |
| Secondary | 30° |
| (1) Set rich stop screw at 4/32". Set air bleed at 1.756. |
| (1) | Set rich stop screw at 4/32". Set air bleed at 1.756. |
3.8L V6, (VIN A) CARBURETOR NO. 17081194
3.8L V6, (VIN A) CARBURETOR NO. 17081196
| Application | Specification |
|---|
| Engine |
| TPS | .97 Volts, High step of fast idle cam. |
| ISC |
| Min. | 450, In Drive. |
| Max. | 900, In Drive. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | 2 1/2 |
| Vacuum Break |
| Primary | 28° |
| Secondary | 24° |
| (1) Set rich stop screw at 4/32". Set air bleed at 1.756. |
| (1) | Set rich stop screw at 4/32". Set air bleed at 1.756. |
3.8L V6, (VIN A) CARBURETOR NO. 17081196
2.8L V6, (VIN A) CARBURETOR NO. 17081197
| Application | Specification |
|---|
| Engine |
| TPS | .97 Volts, High step of fast idle cam. |
| ISC |
| Min. | 450, In Drive. |
| Max. | 900, In Drive. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | 3 1/2 |
| Vacuum Break |
| Primary | 28° |
| Secondary | 24° |
| (1) Set rich stop screw at 4/32". Set air bleed at 1.756. |
| (1) | Set rich stop screw at 4/32". Set air bleed at 1.756. |
2.8L V6, (VIN A) CARBURETOR NO. 17081197
3.8L V6, (VIN A) CARBURETOR NO. 17081198
| Application | Specification |
|---|
| Engine |
| TPS | .97 Volts, High step of fast idle cam. |
| ISC |
| Min. | 450, In Drive. |
| Max. | 900, In Drive. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | 3 |
| Vacuum Break |
| Primary | 28° |
| Secondary | 24° |
| (1) Set rich stop screw at 4/32". Set air bleed at 1.756. |
| (1) | Set rich stop screw at 4/32". Set air bleed at 1.756. |
3.8L V6, (VIN A) CARBURETOR NO. 17081198
3.8L V6, (VIN A) CARBURETOR NO. 17081199
| Application | Specification |
|---|
| Engine |
| TPS | .97 Volts, High step of fast idle cam. |
| ISC |
| Min. | 450, In Drive. |
| Max. | 900, In Drive. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | 2 1/2 |
| Vacuum Break |
| Primary | 28° |
| Secondary | 24° |
| (1) Set rich stop screw at 4/32". Set air bleed at 1.756. |
| (1) | Set rich stop screw at 4/32". Set air bleed at 1.756. |
3.8L V6, (VIN A) CARBURETOR NO. 17081199
3.8L V6, (VIN A) CARBURETOR NO. 17081496
| Application | Specification |
|---|
| Engine |
| TPS | .97 Volts, High step of fast idle cam. |
| ISC |
| Min. | 450, In Drive. |
| Max. | 900, In Drive. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | 2 1/2 |
| Vacuum Break |
| Primary | 28° |
| Secondary | 24° |
| (1) Set rich stop screw at 4/32". Set air bleed at 1.756. |
| (1) | Set rich stop screw at 4/32". Set air bleed at 1.756. |
3.8L V6, (VIN A) CARBURETOR NO. 17081496
3.8L V6, (VIN A) CARBURETOR NO. 17081497
| Application | Specification |
|---|
| Engine |
| TPS | .97 Volts, High step of fast idle cam. |
| ISC |
| Min. | 450, In Drive. |
| Max. | 900, In Drive. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | 2 1/2 |
| Vacuum Break |
| Primary | 28° |
| Secondary | 24° |
| (1) Set rich stop screw at 4/32". Set air bleed at 1.756. |
| (1) | Set rich stop screw at 4/32". Set air bleed at 1.756. |
3.8L V6, (VIN A) CARBURETOR NO. 17081497
3.8L V6, (VIN K) CARBURETOR NO. 17082130
| Application | Specification |
|---|
| Engine |
| TPS | .36 Volts, ISC retracted at slow idle. |
| ISC |
| Min. | 475, In Drive. |
| Max. | 800, In Drive. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | 1 1/4 |
| Vacuum Break |
| Primary | 27° |
| Secondary | N/A |
| (1) Set rich stop screw at 4/32". Set air bleed at 1.756. |
| (1) | Set rich stop screw at 4/32". Set air bleed at 1.756. |
3.8L V6, (VIN K) CARBURETOR NO. 17082130
3.8L V6, (VIN K) CARBURETOR NO. 17082132 (W/AC)
| Application | Specification |
|---|
| Engine |
| TPS | .36 Volts, ISC retracted at slow idle. |
| ISC |
| Min. | 475, In Drive. |
| Max. | 800, In Drive. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | 1 1/4 |
| Vacuum Break |
| Primary | 27° |
| Secondary | N/A |
| (1) Set rich stop screw at 4/32". Set air bleed at 1.756. |
| (1) | Set rich stop screw at 4/32". Set air bleed at 1.756. |
3.8L V6, (VIN K) CARBURETOR NO. 17082132 (W/AC)
3.8L V6, (VIN 9) CARBURETOR NO. 17082130 (1984)
| Application | Specification |
|---|
| Engine |
| TPS | .28 Volts, ISC retracted at slow idle. |
| ISC |
| Min. | 475 |
| Max. | 750, In Drive. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | 1 1/4 |
| Vacuum Break |
| Primary | 27° |
| Secondary | N/A |
| (1) Set rich stop screw at 4/32". Set air bleed at 1.756. |
| (1) | Set rich stop screw at 4/32". Set air bleed at 1.756. |
3.8L V6, (VIN 9) CARBURETOR NO. 17082130 (1984)
4.4L V8, (VIN J) CARBURETOR NO. 17082138
| Application | Specification |
|---|
| Engine |
| TPS | .51 Volts, ISC retracted at slow idle. |
| ISC |
| Min. | ISC not used. |
| Max. | ISC not used. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | 1 1/2 |
| Vacuum Break |
| Primary | 27° |
| Secondary | N/A |
| (1) Set rich stop screw at 4/32". Set air bleed at 1.756. |
| (1) | Set rich stop screw at 4/32". Set air bleed at 1.756. |
4.4L V8, (VIN J) CARBURETOR NO. 17082138
4.4L V8, (VIN J) CARBURETOR NO. 17082140
| Application | Specification |
|---|
| Engine |
| TPS | .51 Volts, ISC retracted at slow idle. |
| ISC |
| Min. | ISC not used. |
| Max. | ISC not used. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | 1 1/2 |
| Vacuum Break |
| Primary | 27° |
| Secondary | N/A |
| (1) Set rich stop screw at 4/32". Set air bleed at 1.756. |
| (1) | Set rich stop screw at 4/32". Set air bleed at 1.756. |
4.4L V8, (VIN J) CARBURETOR NO. 17082140
3.8L V6, (VIN A) CARBURETOR NO. 17082182 W/AC
| Application | Specification |
|---|
| Engine |
| TPS | .77 Volts, High step of fast idle cam. |
| ISC |
| Min. | 450, In Drive. |
| Max. | 900, In Drive. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | (2) * |
| Vacuum Break |
| Primary | 28° |
| Secondary | 24° |
| (1) Set rich stop screw at 4/32". Set air bleed at 1.756. (2) Preset at 3 turns. Adjust if necessary. |
| (1) | Set rich stop screw at 4/32". Set air bleed at 1.756. |
| (2) | Preset at 3 turns. Adjust if necessary. |
3.8L V6, (VIN A) CARBURETOR NO. 17082182 W/AC
3.0L V6, (VIN E) CARBURETOR NO. 17082183
| Application | Specification |
|---|
| Engine |
| TPS | .52 Volts, ISC retracted at slow idle. |
| ISC |
| Min. | 450, In Drive. |
| Max. | 1050, In Drive. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | (2) * |
| Vacuum Break |
| Primary | 24° |
| Secondary | 28° |
| (1) Set rich stop screw at 4/32". Set air bleed at 1.756. (2) Preset at 3 turns. Adjust if necessary. |
| (1) | Set rich stop screw at 4/32". Set air bleed at 1.756. |
| (2) | Preset at 3 turns. Adjust if necessary. |
3.0L V6, (VIN E) CARBURETOR NO. 17082183
2.8L V6, (VIN A) CARBURETOR NO. 17082184
| Application | Specification |
|---|
| Engine |
| TPS | .77 Volts, High step of fast idle cam. |
| ISC |
| Min. | 450, In Drive. |
| Max. | 900, In Drive. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | (2) * |
| Vacuum Break |
| Primary | 28° |
| Secondary | 24° |
| (1) Set rich stop screw at 4/32". Set air bleed at 1.756. (2) Preset at 3 turns. Adjust if necessary. |
| (1) | Set rich stop screw at 4/32". Set air bleed at 1.756. |
| (2) | Preset at 3 turns. Adjust if necessary. |
2.8L V6, (VIN A) CARBURETOR NO. 17082184
3.0L V6, (VIN E) CARBURETOR NO. 17082186
| Application | Specification |
|---|
| Engine |
| TPS | .52 Volts, ISC retracted at slow idle. |
| ISC |
| Min. | 450, In Drive. |
| Max. | 1050, In Drive. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | (2) * |
| Vacuum Break |
| Primary | 24° |
| Secondary | 28° |
| (1) Set rich stop screw at 4/32". Set air bleed at 1.756. (2) Preset at 3 turns. Adjust if necessary. |
| (1) | Set rich stop screw at 4/32". Set air bleed at 1.756. |
| (2) | Preset at 3 turns. Adjust if necessary. |
3.0L V6, (VIN E) CARBURETOR NO. 17082186
3.8L V6, (VIN A) CARBURETOR NO. 17082192
| Application | Specification |
|---|
| Engine |
| TPS | .77 Volts, High step of fast idle cam. |
| ISC |
| Min. | 450, In Drive. |
| Max. | 900, In Drive. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | (2) * |
| Vacuum Break |
| Primary | 28° |
| Secondary | 24° |
| (1) Set rich stop screw at 4/32". Set air bleed at 1.756. (2) Preset at 3 turns. Adjust if necessary. |
| (1) | Set rich stop screw at 4/32". Set air bleed at 1.756. |
| (2) | Preset at 3 turns. Adjust if necessary. |
3.8L V6, (VIN A) CARBURETOR NO. 17082192
2.8L V6, (VIN A) CARBURETOR NO. 17082194
| Application | Specification |
|---|
| Engine |
| TPS | .77 Volts, High step of fast idle cam. |
| ISC |
| Min. | 450, In Drive. |
| Max. | 900, In Drive. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | (2) * |
| Vacuum Break |
| Primary | 28° |
| Secondary | 24° |
| (1) Set rich stop screw at 4/32". Set air bleed at 1.756. (2) Preset at 3 turns. Adjust if necessary. |
| (1) | Set rich stop screw at 4/32". Set air bleed at 1.756. |
| (2) | Preset at 3 turns. Adjust if necessary. |
2.8L V6, (VIN A) CARBURETOR NO. 17082194
3.0L V6, (VIN E) CARBURETOR NO. 17082196
| Application | Specification |
|---|
| Engine |
| TPS | .52 Volts, ISC retracted at slow idle. |
| ISC |
| Min. | 450, In Drive. |
| Max. | 1050, In Drive. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | (2) * |
| Vacuum Break |
| Primary | 21° |
| Secondary | 19° |
| (1) Set rich stop screw at 4/32". Set air bleed at 1.756. (2) Preset at 3 turns. Adjust if necessary. |
| (1) | Set rich stop screw at 4/32". Set air bleed at 1.756. |
| (2) | Preset at 3 turns. Adjust if necessary. |
3.0L V6, (VIN E) CARBURETOR NO. 17082196
3.8L V6, (VIN 9) CARBURETOR NO. 17083130
| Application | Specification |
|---|
| Engine |
| TPS | .51 Volts, ISC retracted at slow idle. |
| ISC |
| Min. | 475, In Drive. |
| Max. | 750, In Drive. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | 1 1/4 |
| Vacuum Break |
| Primary | 27° |
| Secondary | N/A |
| (1) Set rich stop screw at 4/32". Set air bleed at 1.756. |
| (1) | Set rich stop screw at 4/32". Set air bleed at 1.756. |
3.8L V6, (VIN 9) CARBURETOR NO. 17083130
3.8L V6, (VIN 9) CARBURETOR NO. 17083132 W/AC
| Application | Specification |
|---|
| Engine |
| TPS | .51 Volts, ISC retracted at slow idle. |
| ISC |
| Min. | 475, In Drive. |
| Max. | 800, In Drive. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | 1 1/4 |
| Vacuum Break |
| Primary | 27° |
| Secondary | N/A |
| (1) Set rich stop screw at 4/32". Set air bleed at 1.756. |
| (1) | Set rich stop screw at 4/32". Set air bleed at 1.756. |
3.8L V6, (VIN 9) CARBURETOR NO. 17083132 (W/AC)
3.8L V6, (VIN A) CARBURETOR NO. 17083190
| Application | Specification |
|---|
| Engine |
| TPS | .77 Volts, High step of fast idle cam. |
| ISC |
| Min. | 450, In Drive. |
| Max. | 900, In Drive. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | (2) * |
| Vacuum Break |
| Primary | 28° |
| Secondary | 24° |
| (1) Set rich stop screw at 4/32". Set air bleed at 1.756. (2) Preset at 3 turns. Adjust if necessary. |
| (1) | Set rich stop screw at 4/32". Set air bleed at 1.756. |
| (2) | Preset at 3 turns. Adjust if necessary. |
3.8L V6, (VIN A) CARBURETOR NO. 17083190
3.8L V6, (VIN A) CARBURETOR NO. 17083192
| Application | Specification |
|---|
| Engine |
| TPS | .77 Volts, High step of fast idle cam. |
| ISC |
| Min. | 450, In Drive. |
| Max. | 900, In Drive. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | (2) * |
| Vacuum Break |
| Primary | 28° |
| Secondary | 24° |
| (1) Set rich stop screw at 4/32". Set air bleed at 1.756. (2) Preset at 3 turns. Adjust if necessary. |
| (1) | Set rich stop screw at 4/32". Set air bleed at 1.756. |
| (2) | Preset at 3 turns. Adjust if necessary. |
3.8L V6, (VIN A) CARBURETOR NO. 17083192
3.0L V6, (VIN E) CARBURETOR NO.17083193
| Application | Specification |
|---|
| Engine |
| TPS | .42 Volts, At curb idle. |
| ISC |
| Min. | 500, In Drive. |
| Max. | 1300, In Drive. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | (2) * |
| Vacuum Break |
| Primary | 23° |
| Secondary | 28° |
| (1) Set rich stop screw at 4/32". Set air bleed at 1.756. (2) Preset at 3 turns. Adjust if necessary. |
| (1) | Set rich stop screw at 4/32". Set air bleed at 1.756. |
| (2) | Preset at 3 turns. Adjust if necessary. |
3.0L V6, (VIN E) CARBURETOR NO.17083193
3.0L V6, (VIN E) CARBURETOR NO. 17083194
| Application | Specification |
|---|
| Engine |
| TPS | .42 Volts, At curb idle. |
| ISC |
| Min. | 500, In Drive. |
| Max. | 1300, In Drive. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | (2) * |
| Vacuum Break |
| Primary | 27° |
| Secondary | 25° |
| (1) Set rich stop screw at 4/32". Set air bleed at 1.756. (2) Preset at 3 turns. Adjust if necessary. |
| (1) | Set rich stop screw at 4/32". Set air bleed at 1.756. |
| (2) | Preset at 3 turns. Adjust if necessary. |
3.0L V6, (VIN E) CARBURETOR NO. 17083194
3.0L V6, (VIN E) CARBURETOR NO. 17083195
| Application | Specification |
|---|
| Engine |
| TPS | .42 Volts, At curb idle. |
| ISC |
| Min. | 500, In Drive. |
| Max. | 1300, In Drive. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | (2) * |
| Vacuum Break |
| Primary | 23° |
| Secondary | 28° |
| (1) Set rich stop screw at 4/32". Set air bleed at 1.756. (2) Preset at 3 turns. Adjust if necessary. |
| (1) | Set rich stop screw at 4/32". Set air bleed at 1.756. |
| (2) | Preset at 3 turns. Adjust if necessary. |
3.0L V6, (VIN E) CARBURETOR NO. 17083195
3.8L V6, (VIN A) CARBURETOR NO. 17084191
| Application | Specification |
|---|
| Engine |
| TPS | .46 Volts, ISC retracted at slow idle. |
| ISC |
| Min. | 450, In Drive. |
| Max. | 1000, In Drive. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | (2) * |
| Vacuum Break |
| Primary | 28° |
| Secondary | 24° |
| (1) Set rich stop screw at 4/32". Set air bleed at 1.756. (2) Preset at 3 turns. Adjust if necessary. |
| (1) | Set rich stop screw at 4/32". Set air bleed at 1.756. |
| (2) | Preset at 3 turns. Adjust if necessary. |
3.8L V6, (VIN A) CARBURETOR NO. 17084191
2.0L V6, (VIN E) CARBURETOR NO. 17084193 (W/4-SPD. A/T)
| Application | Specification |
|---|
| Engine |
| TPS | .65 Volts, ISC retracted at slow idle. |
| ISC |
| Min. | 500, In Drive. |
| Max. | 1350, In Drive. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | (2) * |
| Vacuum Break |
| Primary | 27° |
| Secondary | 25° |
| (1) Set rich stop screw at 4/32". Set air bleed at 1.756. (2) Preset at 3 turns. Adjust if necessary. |
| (1) | Set rich stop screw at 4/32". Set air bleed at 1.756. |
| (2) | Preset at 3 turns. Adjust if necessary. |
2.0L V6, (VIN E) CARBURETOR NO. 17084193 (W/4-SPD. A/T)
3.0L V6, (VIN E) CARBURETOR NO. 17084195 W/3-SPD. A/T
| Application | Specification |
|---|
| Engine |
| TPS | .57 Volts, ISC retracted at slow idle. |
| ISC |
| Min. | 500, In Drive. |
| Max. | 1350, In Drive. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | (2) * |
| Vacuum Break |
| Primary | 27° |
| Secondary | 25° |
| (1) Set rich stop screw at 4/32". Set air bleed at 1.756. (2) Preset at 3 turns. Adjust if necessary. |
| (1) | Set rich stop screw at 4/32". Set air bleed at 1.756. |
| (2) | Preset at 3 turns. Adjust if necessary. |
3.0L V6, (VIN E) CARBURETOR NO. 17084195 (W/3-SPD. A/T)
3.8L V6, (VIN A) CARBURETOR NO. 17085190
| Application | Specification |
|---|
| Engine |
| TPS | .46 Volts, ISC retracted at slow idle. |
| ISC |
| Min. | 450, In Drive. |
| Max. | 1000, In Drive. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | (2) * |
| Vacuum Break |
| Primary | 28° |
| Secondary | 24° |
| (1) Set rich stop screw at 4/32". Set air bleed at 1.756. (2) Preset at 3 turns. Adjust if necessary. |
| (1) | Set rich stop screw at 4/32". Set air bleed at 1.756. |
| (2) | Preset at 3 turns. Adjust if necessary. |
3.8L V6, (VIN A) CARBURETOR NO. 17085190
3.0L V6, (VIN E) CARBURETOR NO. 17085192 (W/3-SPD.A/T)
| Application | Specification |
|---|
| Engine |
| TPS | .57 Volts, ISC retracted at slow idle. |
| ISC |
| Min. | 500, In Drive. |
| Max. | 1350, In Drive. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | (2) * |
| Vacuum Break |
| Primary | 27° |
| Secondary | 25° |
| (1) Set rich stop screw at 4/32". Set air bleed at 1.756. (2) Preset at 3 turns. Adjust if necessary. |
| (1) | Set rich stop screw at 4/32". Set air bleed at 1.756. |
| (2) | Preset at 3 turns. Adjust if necessary. |
3.0L V6, (VIN E) CARBURETOR NO. 17085192 (W/3-SPD.A/T)
3.0L V6, (VIN E) CARBURETOR NO. 17085194 (W/4-SPD. A/T)
| Application | Specification |
|---|
| Engine |
| TPS | .60 Volts, ISC retracted at slow idle. |
| ISC |
| Min. | 500, In Drive. |
| Max. | 1350, In Drive. |
| Idle Mixture (1) |
| Lean Screw | 1.304 |
| Idle Screw | (2) * |
| Vacuum Break |
| Primary | 27° |
| Secondary | 25° |
| (1) Set rich stop screw at 4/32". Set air bleed at 1.756. (2) Preset at 3 turns. Adjust if necessary. |
| (1) | Set rich stop screw at 4/32". Set air bleed at 1.756. |
| (2) | Preset at 3 turns. Adjust if necessary. |
3.0L V6, (VIN E) CARBURETOR NO. 17085194 (W/4-SPD. A/T)
3.8L V6, (VIN A) CARBURETOR NO. 17086190
| Application | Specification |
|---|
| Engine |
| TPS | (1) * |
| ISC |
| Min. | 450, In Drive. |
| Max. | 900, In Drive. |
| Idle Mixture (2) |
| Lean Screw | 1.304 |
| Idle Screw | (3) * |
| Vacuum Break |
| Primary | 28° |
| Secondary | 24° |
| (1) .46 Volts, Preset at 3 turns. Adjust if necessary. (2) Set rich stop screw at 4/32". Set air bleed at 1.756. (3) Preset at 3 turns. Adjust if necessary. |
| (1) | .46 Volts, Preset at 3 turns. Adjust if necessary. |
| (2) | Set rich stop screw at 4/32". Set air bleed at 1.756. |
| (3) | Preset at 3 turns. Adjust if necessary. |
3.8L V6, (VIN A) CARBURETOR NO. 17086190
