Reference Information
Schematic Reference
Steering Wheel Secondary/Configurable Control Schematics
Connector End View Reference
COMPONENT CONNECTOR END VIEWS - INDEX
Description and Operation
Steering Wheel Controls Description and Operation
Electrical Information Reference
- «Circuit Testing»(ref-491170-S01761107082012073000000)
- «Connector Repairs»(ref-491170-S29468502572012073000000)
- «Testing for Intermittent Conditions and Poor Connections»(ref-491170-S23088445062012073000000)
- «Wiring Repairs»(ref-491170-S24000289392012073000000)
Scan Tool Reference
Control Module References
Circuit/System Verification
Engine running, accessories OFF, measure and record the battery voltage at the battery terminals. The voltage should be between 12.6-15.0 V.
- If not within the specified range, refer to «Charging System Test»(ref-491171-S12684108552012073000000) .
Repair Instructions
Perform the Diagnostic Repair Verification after completing the diagnostic procedure.
Control Module References for BCM replacement, setup, and programming
Schematic Reference
Steering Wheel Secondary/Configurable Control Schematics
Connector End View Reference
COMPONENT CONNECTOR END VIEWS - INDEX
Description and Operation
Steering Wheel Controls Description and Operation
Electrical Information Reference
- «Circuit Testing»(ref-491170-S01761107082012073000000)
- «Connector Repairs»(ref-491170-S29468502572012073000000)
- «Testing for Intermittent Conditions and Poor Connections»(ref-491170-S23088445062012073000000)
- «Wiring Repairs»(ref-491170-S24000289392012073000000)
Scan Tool Reference
Control Module References for scan tool information
Perform the Diagnostic Repair Verification after completing the diagnostic procedure.
Control Module References for BCM replacement, setup, and programming
Schematic Reference
Steering Wheel Secondary/Configurable Control Schematics
Connector End View Reference
COMPONENT CONNECTOR END VIEWS - INDEX
Description and Operation
Steering Wheel Controls Description and Operation
Electrical Information Reference
- «Circuit Testing»(ref-491170-S01761107082012073000000)
- «Connector Repairs»(ref-491170-S29468502572012073000000)
- «Testing for Intermittent Conditions and Poor Connections»(ref-491170-S23088445062012073000000)
- «Wiring Repairs»(ref-491170-S24000289392012073000000)
Scan Tool Reference
Control Module References for scan tool information
Perform the Diagnostic Repair Verification after completing the diagnostic procedure.
Control Module References for BCM replacement, setup, and programming
Symptoms - Secondary and Configurable Customer Controls
Note. The following steps must be completed before using the symptom tables.
- Perform the «Diagnostic System Check - Vehicle»(ref-491140-S24065023222012073000000) before using the symptom tables in order to verify that all of the following are true: There are no DTCs set. The control modules can communicate via the serial data link.
- Review the system description and operation in order to familiarize yourself with the system functions. Refer to «Steering Wheel Controls Description and Operation»(ref-491214-S08189322992012073000000) .
Intermittent
Faulty electrical connections or wiring may be the cause of intermittent conditions. Refer to Testing for Intermittent Conditions and Poor Connections .
Schematic Reference
Steering Wheel Secondary/Configurable Control Schematics
Connector End View Reference
COMPONENT CONNECTOR END VIEWS - INDEX
Description and Operation
Steering Wheel Controls Description and Operation
Electrical Information Reference
- «Circuit Testing»(ref-491170-S01761107082012073000000)
- «Connector Repairs»(ref-491170-S29468502572012073000000)
- «Testing for Intermittent Conditions and Poor Connections»(ref-491170-S23088445062012073000000)
- «Wiring Repairs»(ref-491170-S24000289392012073000000)
Scan Tool Reference
Control Module References for scan tool information
Perform the Diagnostic Repair Verification after completing the diagnostic procedure.
Control Module References for BCM replacement, setup, and programming