Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Brake Caliper Bracket Bolt- Front | 190 N.m | 140 lb ft |
| Brake Caliper Bracket Bolt- Rear | 125 N.m | 92 lb ft |
| Brake Caliper Guide Pin Bolt- Front and Rear | 27 N.m | 20 lb ft |
| Brake Hose Fitting Bolt- Front | 40 N.m | 30 lb ft |
| Brake Hose Fitting Bolt- Rear | 52 N.m | 38 lb ft |
| Brake Rotor Screw- Front | 9 N.m | 80 lb in |
| Brake Rotor Screw- Rear | 10 N.m | 89 lb in |
Fastener Tightening Specifications
Disc Brake Component Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Brake Pads- Front and Rear | ||
| Minimum Thickness | 2.0 mm | 0.08 in |
| Front Disc Brake Rotor | ||
| Diameter | 321.00 mm | 12.64 in |
| Discard Thickness* | 27.00 mm | 1.06 in |
| Maximum Allowable Lateral Runout | 0.06 mm | 0.002 in |
| Maximum Allowable Scoring | 1.60 mm | 0.06 in |
| Maximum Allowable Thickness Variation | 0.025 mm | 0.001 in |
| Rear Disc Brake Rotor | ||
| Diameter | 303.00 mm | 11.93 in |
| Discard Thickness* | 18.40 mm | 0.72 in |
| Maximum Allowable Lateral Runout | 0.06 mm | 0.002 in |
| Maximum Allowable Scoring | 1.60 mm | 0.06 in |
| Maximum Allowable Thickness Variation | 0.025 mm | 0.001 in |
| *All disc brake rotors have a discard dimension cast into them. Replace any rotor that does not meet this specification. After refinishing the brake rotor, measure the brake rotor thickness. Replace any brake rotor which exceeds the discard specification. | ||
Disc Brake Component Specifications