Fastener Tightening Specifications (Off Vehicle)
| Application | *Ref No. | Quantity | Size | Specification | |
|---|---|---|---|---|---|
| Metric | English | ||||
| A/Trans Case Cover Bolt | 18 | 10 | M6x1.0x30 | 12 N.m | 106 lb in |
| A/Trans Fluid Pump Bolt | 1 | 3 | M6x1.0x25 | 12 N.m | 106 lb in |
| A/Trans Fluid Trough Bolt | 11 | 1 | M6x1.0x25 | 12 N.m | 106 lb in |
| Control Valve Body Assembly (Complete) Bolt | 19, 21 | 3 | M6x1.0x55 | 12 N.m | 106 lb in |
| Control Valve Body Assembly (Complete) Bolt | 20 | 3 | M6x1.0x35 | 12 N.m | 106 lb in |
| Control Valve Body Assembly (Complete) Bolt | 22 | 5 | M6x1.0x65 | 12 N.m | 106 lb in |
| Control Valve Body to Case | 23 | 2 | M6x1.0x55 | 12 N.m | 106 lb in |
| Control Valve Body to Case Bolt | 24 | 8 | M6x1.0x65 | 12 N.m | 106 lb in |
| Control Valve Assembly (w/TCM and Body) to Case Bolt | 25 | 1 | M6x1.0x42 | 12 N.m | 106 lb in |
| Control Valve Assembly (w/TCM and Body) to Case Bolt | 26 | 1 | M6x1.0x55 | 12 N.m | 106 lb in |
| Control Valve Assembly (w/TCM and Body) to Case Bolt | 27 | 2 | M6x1.0x65 | 12 N.m | 106 lb in |
| Control Valve Assembly (w/TCM and Body) to Case Bolt | 28 | 4 | M6x1.0x80 | 12 N.m | 106 lb in |
| Control Valve Assembly (w/TCM and Body) to Case Bolt | 29 | 3 | M6x1.0x95 | 12 N.m | 106 lb in |
| Control Valve Body Cover Bolt | 30 | 12 | M6x1.0x30 | 12 N.m | 106 lb in |
| Control Valve Body Cover Stud | 31 | 2 | M6x1.0x30 | 12 N.m | 106 lb in |
| Fluid Pressure Test Hole Plug | 12 | 1 | 1/8"-27 NPTF | 12 N.m | 106 lb in |
| Fluid Level Hole Plug | 13 | 1 | 1/8"-27 NPTF | 12 N.m | 106 lb in |
| Front Differential Carrier Baffle Bolt | 6 | 1 | M6x1.0x25 | 12 N.m | 106 lb in |
| Front Differential Transfer Drive Gear Support Bolt | |||||
| First Pass | 5 | 9 | M8x1.25x25 | 10 N.m | 89 lb in |
| Final Pass | 5 | 9 | M8x1.25x25 | 50 degrees | |
| Input Shaft Support Bolt (Torx) | N/A | 3 | M6x1.0x50 | 12 N.m | 106 lb in |
| Input Speed Sensor Bolt | 17 | 1 | M6x1.0x25 | 9 N.m | 80 lb in |
| Output Speed Sensor Bolt | 14 | 1 | M6x1.0x25 | 12 N.m | 106 lb in |
| Park Pawl Actuator Bracket Bolt | 10 | 2 | M6x1.0x25 | 12 N.m | 106 lb in |
| Support Fluid Passage Tube (Torx) Bolt | 2 | 2 | M5x0.8x12 | 7 N.m | 62 lb in |
| Support Fluid Passage Tube Bolt | 3 | 2 | M6x1.0x15 | 12 N.m | 106 lb in |
| Torque Converter and Differential Housing Bolt | 8 | 14 | M8x1.25x35 | 36 N.m | 27 lb ft |
| Torque Converter and Differential Housing Bolt | 9 | 3 | M8x1.25x35 | 30 N.m | 22 lb ft |
| Transmission Cooler Pipe (External Torx) Stud | 15 | 2 | M8x1.25x30.5 | 12 N.m | 106 lb in |
| *Reference number refers to the component callout number in Disassembled Views | |||||
Fastener Tightening Specifications (Off Vehicle)
Fastener Tightening Specifications (On Vehicle)
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Control Valve Body Bolts | 12 N.m | 106 lb in |
| Control Valve Body Cover Bolts | 12 N.m | 106 lb in |
| Control Valve Body Cover Studs | 12 N.m | 106 lb in |
| Drain Plug | 12 N.m | 106 lb in |
| Fluid Cooler Fitting at Radiator | 38 N.m | 28 lb ft |
| Fluid Cooler Outlet Pipe Retainer Nut | 22 N.m | 16 lb ft |
| Fluid Cooler Pipe Nut | 228 N.m | 16 lb ft |
| Fluid Pressure Test Hole Plug | 12 N.m | 106 lb in |
| Input Speed Sensor Fastener | 9 N.m | 80 lb in |
| Output Speed Sensor Fastener | 12 N.m | 106 lb in |
| Shift Control Knob Retaining Screw | 1.5 N.m | 13 lb in |
| Torque Converter to Flywheel Bolt | 62 N.m | 46 lb ft |
| Transaxle Bracket Bolts | 50 N.m | 37 lb ft |
| Transaxle Front Mount to Transmission Bolts | 57 N.m | 42 lb ft |
| Transaxle Front Mount Through Bolt | 100 N.m | 74 lb ft |
| Transaxle Left Mount to Frame Rail Bolts | 27 N.m | 20 lb ft |
| Transaxle Left Mount Bracket to Transmission Bolts | 57 N.m | 42 lb ft |
| Transaxle Range Selector Cable Bracket Bolt | 25 N.m | 18 lb ft |
| Transaxle Range Switch Lever Nut | 20 N.m | 15 lb ft |
| Transaxle Rear Mount to Frame Bolts | 57 N.m | 42 lb ft |
| Transaxle Rear Mount Through Bolt | 100 N.m | 74 lb ft |
| Transaxle Rear Mount Bracket to Transmission Bolt | 100 N.m | 74 lb ft |
| Transaxle Rear Mount Bracket to PTU | 57 N.m | 42 lb ft |
| Transaxle Shift Control Nut | 25 N.m | 18 lb ft |
| Transaxle to Engine Bolt | 75 N.m | 55 lb ft |
| Transmission Fluid Cooler Pipe Quick Connect Fitting | 38 N.m | 28 lb ft |
| Transmission Fluid Cooler Pipe Mounting Nuts | 22 N.m | 16 lb ft |
Fastener Tightening Specifications (On Vehicle)
Transmission General Specifications
| Name | 6T70/6T75 |
|---|---|
| RPO Codes | 6T70-MH2 (2WD), MH4 (4WD) 6T75-MY9 (2WD), MH6 (4WD) |
| Production Location | Warren Michigan (USA), Ramos, Mexico |
| Transaxle Drive | Front Wheel Drive, All Wheel Drive |
| Reverse Gear Ratio | 2.88 |
| 1st Gear Ratio | 4.484 |
| 2nd Gear Ratio | 2.872 |
| 3rd Gear Ratio | 1.842 |
| 4th Gear Ratio | 1.414 |
| 5th Gear Ratio | 1.000 |
| 6th Gear Ratio | 0.742 |
| Effective Final Drive Gear Ratio | 2.77/3.16/3.39 |
| Torque Converter Size- Diameter of Torque Converter Turbine | 246 mm |
| Pressure Taps | Line Pressure |
| Transaxle Fluid Type | DEXRON VI® |
| Transaxle Fluid Capacity | 9.0 L/9.5 qts Quarts |
| Transaxle Type: 6 | Six Forward Gears |
| Transaxle Type: T | Transverse Mount |
| Transaxle Type: 70/75 | Product Series |
| Position Quadrant | P, R, N, D, * *(Refer to the applicable owner's manual) |
| Case Material | Die Cast Aluminum |
| Transaxle Net Weight | 104 kg |
| Maximum Trailer Towing Capacity | N/A |
| Maximum Gross Vehicle Weight (GVW) | 4, 000 lbs |
Transmission General Specifications
Fluid Capacity Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Valve Body Cover Removal - Approximate Capacity | 5.0-7.0 liters | 5.3-7.4 quarts |
| Fluid Change - Drain Plug - Approximate Capacity | 4.0-6.0 liters | 4.2- 6.3 quarts |
| Overhaul - Approximate Capacity | 7.0-9.0 liters | 7.4-9.5 quarts |
Fluid Capacity Specifications
Taper Bearing Preload Selective Specifications
| Thrust Washer O.D. Color Code | Washer Thickness | |
|---|---|---|
| Metric | English | |
| Brown | 0.494 mm | 0.020 in |
| Purple | 0.545 mm | 0.022 in |
| Black | 0.596 mm | 0.024 in |
| Pink | 0.647 mm | 0.026 in |
| Dark Blue | 0.698 mm | 0.028 in |
| Light Green | 0.749 mm | 0.030 in |
| Plain | 0.800 mm | 0.032 in |
| White | 0.851 mm | 0.034 in |
| Light Blue | 0.902 mm | 0.036 in |
| Orange | 0.953 mm | 0.038 in |
| White/Black | 1.004 mm | 0.040 in |
| White/Orange | 1.055 mm | 0.042 in |
| White/Light Green | 1.106 mm | 0.044 in |
Front Differential Drive Pinion Gear and Differential Thrust Washer Selection Chart