TORQUE SPECIFICATIONS (GASOLINE)
| Application | Ft. Lbs. (N.m) |
|---|
| Camshaft Position Sensor Bolt |
| 2.0L | 11 (15) |
| 4.8L, 5.3L & 6.0L | 18 (24) |
| Crankshaft Position Sensor Bolt |
| 1.6L | 11 (15) |
| 4.3L | 15 (20) |
| 4.8L, 5.3L, 6.0L & 6.5L | 18 (24) |
| Engine Coolant Temperature Sensor |
| 1.6L & 2.0L | 11 (15) |
| 2.2L | 18 (24) |
| 3.4L | 17 (23) |
| 4.3L, 4.8L, 5.3L & 6.0L | 15 (20) |
| 5.0L, 5.7L & 7.4L | 10 (13) |
| EGR Valve |
| Except 3.4L | 18 (24) |
| 3.4L | 22 (30) |
| Fuel Line Nut |
| 3.4L | 13 (17) |
| 4.3L, 5.0L & 5.7L | 22 (30) |
| 7.4L | 20 (27) |
| Fuel Rail Retaining Bolts |
| 1.6L & 2.0L | 13.5-20.0 (18-27) |
| 2.2L | 18 (24) |
| 3.4L, 4.8L, 5.3L, 6.0L & 7.4L | (1) |
| Intake Manifold Assembly Bolt |
| 2.2L | 18 (24) |
| Knock Sensor | 14 (19) |
| Oxygen Sensor | 30 (41) |
| Throttle Body-To-Manifold Bolt/Nut |
| 1.6L , 2.0L & 7.4L | 18 (24) |
| 2.2L, 4.8L, 5.3L & 6.0L | (1) |
| 3.4L | 21 (28) |
| 4.3L, 5.0L & 5.7L | (2) |
| Upper Intake Manifold Bolts |
| 3.4L | 18 (24) |
| 4.3L, 5.0L & 5.7L | (3) |
| 7.4L | 13 (18) |
| INCH Lbs. (N.m) |
| Camshaft Position Sensor Bolt |
| 1.6L | 78 (9) |
| 3.4L | 89 (10) |
| Crankshaft Position Sensor Bolt |
| 2.0L | 54 (6) |
| 2.2L, 5.0L, 5.7L & 7.4L | 71 (8) |
| 3.4L |
| 7X Sensor | 71 (8) |
| 24X Sensor | 89 (10) |
| Fuel Meter Body Bolt |
| 4.3L, 5.0L & 5.7L | 89 (10) |
| Fuel Sending Unit Assembly Bolt |
| 1.6L & 2.0L | 60 (5) |
| Idle Air Control Valve Screws |
| Except 1.6L & 2.0L | 27 (3) |
| 1.6L & 2.0L | 30 (3.5) |
| Ignition Coil Mounting Bolt |
| 1.6L & 2.0L | 89 (10) |
| Ignition Coil Bracket Stud |
| 4.8L, 5.3L & 6.0L | 106 (12) |
| Ignition Coil Pack/Ignition Control Module Assembly |
| 2.2L | 18 (24) |
| Throttle Position Sensor Bolt |
| Except 1.6L, 2.0L & 2.2L | 18 (24) |
| 1.6L & 2.0L | 30 (3.5) |
| 2.2L | 27 (3) |
| (1) Tighten bolts to 89 INCH lbs. (10 N.m). (2) Tighten bolts to 80 INCH lbs. (9 N.m). (3) Tighten studs incrementally to 44 INCH lbs (5 N.m), and then fully to 80 INCH lbs. (9 N.m). |
| (1) | Tighten bolts to 89 INCH lbs. (10 N.m). |
| (2) | Tighten bolts to 80 INCH lbs. (9 N.m). |
| (3) | Tighten studs incrementally to 44 INCH lbs (5 N.m), and then fully to 80 INCH lbs. (9 N.m). |
TORQUE SPECIFICATIONS (GASOLINE)
TORQUE SPECIFICATIONS (DIESEL)
| Application | Ft. Lbs. (N.m) |
|---|
| Glow Plugs | 13 (18) |
| Injection Line Fittings | 20 (27) |
| Injection Nozzles | 50 (68) |
| Injection Pump Mounting Nuts | 30 (41) |
| Injection Pump-To-Drive Gear Retaining Bolts | 18 (24) |
| Intake Manifold Bolts |
| Lower | 31 (42) |
| Upper | 17 (23) |
| Turbocharger Oil Feed Line Fitting |
| "C" & "K" Series | 13 (18) |
| "P" Series | 21 (28) |
| Turbocharger-To-Exhaust Manifold Nuts |
| "C", "K" & "P" Series | 43 (58) |
| "G" Series | 48 (65) |
| Wastegate Actuator Bracket Bolts | 17 (23) |
TORQUE SPECIFICATIONS (DIESEL)
