FLUID TYPE
Manufacturer recommends General Motors Power Steering Fluid (1050017) or an equivalent meeting G.M. Specification No. 9985010. Failure to use proper fluid will cause hose and seal damage, resulting in fluid leaks.
FLUID LEVEL CHECK
To check fluid level, run engine until power steering fluid reaches normal operating temperature, about 170°F (77°C). Turn engine off. Remove fluid reservoir cap, and check level gauge. On models with remote reservoir, fluid level should be about 1/2"-1" (12.7-25.4 mm) from top of reservoir with wheels turned fully left. Add fluid through fluid reservoir cap as necessary, and recheck fluid level. DO NOT overfill system.