| Vehicle | High | Low |
|---|
| Passenger Cars (1) |
| "A" Body | (2) | (3) |
| "B" Body | (4) | (3) |
| "C" Body | (5) | (3) |
| "D" Body | (6) | (3) |
| "E" Body | (7) | (3) |
| "F" Body | (4) | (3) |
| "H" Body | (5) | (3) |
| "J" Body | (4) | (3) |
| "K" Body | (7) | (3) |
| "L" Body | (4) | (3) |
| "N" Body | (4) | (3) |
| "W" Body | (5) | (3) |
| "Y" Body | (8) | (3) |
| (1) Body codes are determined by fourth character of VIN code. (2) In discharge line near compressor. (3) In the line to accumulator or on accumulator. (4) In discharge line near condenser. (5) In discharge line near fender panel. (6) On muffler in discharge line near the compressor. (7) In discharge line near brake master cylinder. (8) In liquid line near evaporator. |
| (1) | Body codes are determined by fourth character of VIN code. |
| (2) | In discharge line near compressor. |
| (3) | In the line to accumulator or on accumulator. |
| (4) | In discharge line near condenser. |
| (5) | In discharge line near fender panel. |
| (6) | On muffler in discharge line near the compressor. |
| (7) | In discharge line near brake master cylinder. |
| (8) | In liquid line near evaporator. |
1992 PASSENGER CAR SERVICE VALVE LOCATIONS
1992 TRUCK/VAN SERVICE VALVES LOCATION
| Vehicle | High | Low |
|---|
| Trucks & Vans (1) |
| "C" & "K" Series | (2) | (3) |
| "G" Series | (2) | (5) |
| "L" & "M" Series | (4) | (5) |
| "P", "R" & "V" Series | (2) | (5) |
| "S" &"T" Series | (2) | (5) |
| "U" Series | (2) | (5) |
| (1) Series codes are determined by fifth character of VIN code. (2) In discharge line near evaporator. (3) In suction line near accumulator. (4) In discharge line near compressor. (5) Service valve on accumulator. |
| (1) | Series codes are determined by fifth character of VIN code. |
| (2) | In discharge line near evaporator. |
| (3) | In suction line near accumulator. |
| (4) | In discharge line near compressor. |
| (5) | Service valve on accumulator. |
1992 TRUCKS & VANS SERVICE VALVE LOCATIONS
| Application | Orifice Tube Location | Orifice Tube Remover/Installer |
|---|
| Passenger Cars (1) |
| "A" Body | Condenser | J-26549-C |
| "B" Body | Condenser | J-26549-E |
| "C" Body | Evaporator | J-26549-D |
| "D" Body | Evaporator | J-26549-D |
| "E" Body | Evaporator | J-26549-D |
| "F" Body | Evaporator | J-26549-D |
| "H" Body | Condenser | J-26549-D |
| "J" Body | Condenser | J-26549-89 |
| "K" Body | Evaporator | J-26549-D |
| "L" Body | Evaporator | J-26549-D |
| "N" Body | Condenser | J-26549-89 |
| "W" Body | Evaporator | J-26549-C |
| "Y" Body | Evaporator | J-26549-D |
| Trucks & Vans (2) |
| "C" Series | Evaporator | Not Available |
| "G" Series | Evaporator | Not Available |
| "K" Series | Evaporator | Not Available |
| "L" Series | Evaporator | Not Available |
| "M" Series | Evaporator | Not Available |
| "P" Series | Evaporator | Not Available |
| "R" Series | Evaporator | Not Available |
| "S" Series | Evaporator | J-26549-D |
| "T" Series | Evaporator | J-26549-D |
| "U" Series | Condenser | J-26549-C |
| "V" Series | Evaporator | Not Available |
| (1) Body codes are determined by fourth character of VIN code. (2) Series codes are determined by fifth character of VIN code. |
| (1) | Body codes are determined by fourth character of VIN code. |
| (2) | Series codes are determined by fifth character of VIN code. |
1992 ORIFICE TUBE LOCATION & REMOVER/INSTALLER APPLICATION
- If difficulty is encountered during removal of a plugged or restricted orifice tube, remove as much impacted residue as possible.
- Using a heat gun, carefully apply heat on inlet pipe. If inlet pipe contains small dimples in the line, apply heat 1/4" away from the dimples. On all applications, use care not to overheat pipe. NOTE: If system has a pressure switch near orifice tube location, remove pressure switch prior to heating the pipe to avoid switch damage.
- While heat is being applied, install proper orifice tube remover/installer in orifice tube. Use a turning motion along with a push or pull motion to loosen orifice tube and remove it.
