DESCRIPTION & OPERATION
If the driver's seat belt is not buckled, and the ignition switch is turned to the "ON" or "START" position, the seat belt warning system will light the "FASTEN SEAT BELTS" indicator and sound the buzzer for 4 to 8 seconds.
If the driver's belt is buckled after the buzzer sounds, the buzzer will still remain on 4 to 8 seconds. When the ignition switch is turned to the "ON" position, current is supplied through the timer to the buzzer circuit and indicator light circuit.
The light will always remain on until the timer turns off the current. The buzzer will only sound if the driver's seat belt is not buckled before turning on the ignition switch.
NO SEAT BELT BUZZER OR LIGHT
Check power from ignition switch. Test continuity between switch and timer/buzzer. Replace timer/buzzer.
NO SEAT BELT BUZZER
Check seat belt switch. Test continuity between switch and timer/buzzer. Replace timer/buzzer.
NO WARNING LIGHT
Check power and ground connections. Check for burned out indicator bulb. Test continuity between switch and timer/buzzer. Replace timer/buzzer.
SEAT BELT BUZZER & INDICATOR ALWAYS ON
Check for short to ground in seat belt switch or wire. Open ground connection for timer/buzzer. Replace timer/buzzer.
KEY BUZZER DOESN'T OPERATE
Check fuse. Check door jamb switch for proper operation. Check for open circuit. Replace key buzzer switch.
KEY BUZZER ALWAYS ON
Check for short circuit to ground between key and door switch, or inoperative door switch. Replace key buzzer switch.