Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Accessory Wiring Junction Block Nut | 22 N.m | 16 lb ft |
| Air Conditioning Liquid Line Clamp Bolt | 9 N.m | 80 lb in |
| Battery Cover Screw | 1.6 N.m | 14 lb in |
| Battery Hold Down Bolt | 25 N.m | 18 lb ft |
| Battery Negative Cable Extension Cable to Cylinder Head Bolt | 58 N.m | 43 lb ft |
| Battery Negative Cable Extension Cable to Left Wheelhouse Panel Upper Reinforcement Bolt | 58 N.m | 43 lb ft |
| Battery Positive Junction Block Cable to Generator Nut | 22 N.m | 16 lb ft |
| Coolant Recovery Reservoir Bolt | 5 N.m | 44 lb in |
| Generator Bolt | 50 N.m | 37 lb ft |
| Negative Battery Cable Ground Bolt | 25 N.m | 18 lb ft |
| Negative Battery Cable Terminal Nut | 9 N.m | 80 lb in |
| Positive Battery Cable Terminal Nut | 9 N.m | 80 lb in |
| Starter Bolt | 50 N.m | 37 lb ft |
| Starter Heat Shield Bolt | 7 N.m | 62 lb in |
| Starter Solenoid BAT Terminal Nut | 25 N.m | 18 lb ft |
Reserve Capacity
Reserve capacity is the amount of time in minutes it takes a fully charged battery, being discharged at a constant rate of 25 amperes and a constant temperature of 27°C (80°F), to reach a terminal voltage of 10.5 volts. Refer to Battery Usage for the reserve capacity rating of the original equipment battery.