Fastener Tightening Specifications
| Application | Specification |
|---|
| Metric | English |
| Brake Caliper Bleed Valve - Front | 13 N.m | 115 lb in |
| Brake Caliper Bleed Valve - Rear | 7 N.m | 62 lb in |
| Brake Caliper Bracket Bolts - Front | 175 N.m | 129 lb ft |
| Brake Caliper Bracket Bolts - Rear | 175 N.m | 129 lb ft |
| Brake Caliper Guide Pin Bolts - Front Tighten the guide pin bolt closest to the bleed valve first. | 64 N.m | 47 lb ft |
| Brake Caliper Guide Pin Bolts - Rear Tighten the guide pin bolt closest to the bleed valve first. | 27 N.m | 20 lb ft |
| Brake Hose Fitting Bolt - Front | 40 N.m | 30 lb ft |
| Brake Hose Fitting Bolt - Rear | 50 N.m | 37 lb ft |
| Brake Rotor Retention Screw - Front | 12 N.m | 106 lb in |
| Brake Rotor Retention Screw - Rear | 12 N.m | 106 lb in |
Disc Brake Component Specifications
| Application | Specification |
|---|
| Metric | English |
| Front Brakes |
| Rotor Minimum Thickness * | 27.5 mm | 1.08 in |
| Rotor Thickness (new) | 29.0 mm | 1.14 in |
| Rotor Maximum Allowable Assembled Lateral Runout | 0.06 mm | 0.002 in |
| Rotor Maximum Allowable Scoring | 1.50 mm | 0.059 in |
| Rotor Maximum Allowable Thickness Variation | 0.025 mm | 0.001 in |
| Rear Brakes |
| Rotor Minimum Thickness * | 18.4 mm | 0.72 in |
| Rotor Thickness (new) | 20 mm | 0.79 in |
| Rotor Maximum Allowable Assembled Lateral Runout | 0.06 mm | 0.002 in |
| Rotor Maximum Allowable Scoring | 1.50 mm | 0.059 in |
| Rotor Maximum Allowable Thickness Variation | 0.025 mm | 0.001 in |
| * All brake rotors have a minimum thickness dimension cast into them. Replace any rotor that is worn or machined below this specification. |
