CAPACITIES
| Application | Cold Crank Amps @ 0°F (-18°C) | Reserve Minutes |
|---|
| Metro | 390 | 50 |
| Application | Qts. (L) |
|---|
| Crankcase (Includes Filter) (1) | 3.7 (3.5) |
| Cooling System (Includes Heater) |
| A/T | 4.2 (4.0) |
| M/T | 4.1 (3.9) |
| Automatic Transaxle (Dexron-II) | 5.2 (4.9) |
| Manual Transaxle (2) | 2.5 (2.4) |
| (1) Use engine oil with API rating of SG. (2) Use synthetic 75W-90 GL-4 gear lubricant (GM 12345871). |
| (1) | Use engine oil with API rating of SG. |
| (2) | Use synthetic 75W-90 GL-4 gear lubricant (GM 12345871). |
SERVICE INTERVALS & SPECIFICATIONS
| Component | Miles |
|---|
| Air Filter | 30,000 |
| Coolant | 30,000 |
| Ignition Wires | 60,000 |
| Oil & Filter | 7500 |
| PCV Inlet Filter | 60,000 |
| Spark Plug | 30,000 |
| Timing Belt | 60,000 |
| Transaxle Lubricant |
| A/T | (2) 100,000 |
| M/T | (3) |
| (1) Under normal driving conditions. (2) Change A/T cooler hoses at 45,000 miles. (3) Fluid does not require changing unless contaminated. |
| (1) | Under normal driving conditions. |
| (2) | Change A/T cooler hoses at 45,000 miles. |
| (3) | Fluid does not require changing unless contaminated. |
REPLACEMENT INTERVALS (1)
| Application | (1) Belt Deflection |
|---|
| A/C Compressor | .20-.25" (5.1-6.4 mm) |
| Alternator |
| New Belt | .20-.27" (5.1-7.0 mm) |
| Used Belt (2) | .24-.31" (6.1-8.0 mm) |
| Water Pump | .25-.32" (6.4-8.1 mm) |
| (1) Deflection is with 22 lbs. (10 kg) pressure applied midway on longest belt run. (2) Used belt is a belt in operation for more than 5 minutes. |
| (1) | Deflection is with 22 lbs. (10 kg) pressure applied midway on longest belt run. |
| (2) | Used belt is a belt in operation for more than 5 minutes. |
