Engine Controls - Specifications - 3.0L: Removal & Installation Ford Windstar I

Removal

1. Relieve fuel system pressure as described in «FUEL SYSTEM PRESSURE RELEASE»(ref-131320-S09028779822001121400000) .
2. Raise vehicle on hoist.
3. Remove push connect fittings at both ends of the fuel filter.
4. Install new retainer clips in each connect fitting.
5. Remove fuel filter by pulling fuel filter toward center line of vehicle and free from fuel filter bracket.

Installation

1. Install fuel filter in fuel filter bracket, ensuring proper direction of flow.
2. Install push connect fittings at both ends of fuel filter.
3. Lower vehicle.
4. Start engine and inspect for leaks.