DISC BRAKE SPECIFICATIONS
| Application | In. (mm) |
|---|
| Front |
| Brake Pad Minimum Thickness (1) | .118 (3.0) |
| Brake Pad Minimum Thickness Variation (Pad-To-Pad) | .079 (2.0) |
| Brake Pad Maximum Taper Wear (In Any Direction) | .118 (3.0) |
| Diameter | 11.8 (300) |
| Lateral Runout | .004 (.102) |
| Minimum Thickness | (2) 1.10 (28) |
| Minimum Machine To Thickness | 1.12 (28.6) |
| Original Thickness | (3) |
| Parallelism (Maximum Thickness Variation) | .0004 (.010) |
| Rear |
| Brake Pad Minimum Thickness (1) | .039 (1.0) |
| Brake Pad Minimum Thickness Variation (Pad-To-Pad) | .079 (2.0) |
| Brake Pad Maximum Taper Wear (In Any Direction) | .039 (1.00) |
| Diameter | 11.3 (287) |
| Lateral Runout | .004 (.10) |
| Minimum Thickness | (2) 0.502 (12.75) |
| Minimum Machine To Thickness | 0.52 (13.35) |
| Original Thickness | (3) |
| Parallelism (Maximum Thickness Variation) | 0.0004 (0.010) |
| (1) Above backing plate or rivets. (2) Minimum thickness is stamped on disc/rotor. (3) Information not provided by manufacturer. |
| (1) | Above backing plate or rivets. |
| (2) | Minimum thickness is stamped on disc/rotor. |
| (3) | Information not provided by manufacturer. |
DISC BRAKE SPECIFICATIONS
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) |
|---|
| Brake Booster/Pedal Bracket Bolt | 18 (24) |
| Brake Tube-To-Master Cylinder Fitting | 11-15 (15-20) |
| Coolant Reservoir Bolt | 11 (15) |
| Cowl Brace Bolt/Nut | 15 (20) |
| Front Caliper |
| Anchor Plate Bolt | 76 (103) |
| Flow Bolt | 35 (47) |
| Guide Pin Bolt | 26 (35) |
| Master Cylinder Mounting Nut | 22 (30) |
| Power Brake Booster Mounting Nut | 22 (30) |
| Radiator Coolant Reservoir Bolt | 11 (15) |
| Rear Caliper |
| Support Bracket Bolt | 76 (103) |
| Bleeder Screw | 12-18 (16-24) |
| Flow Bolt | 36 (49) |
| Guide Pin Bolt | 25 (34) |
| Strut Tower Brace Nuts | 21 (28) |
| Vacuum Hose Bracket Nut | 11 (15) |
| Vapor Management Valve (VMV) Nut | 21 (28) |
| Wheel Lug Nut | 100 (136) |
| Windshield Wiper Arm Nut | 26 (35) |
| INCH Lbs. |
| Bleed Screw (Front) | 62-115 (7-13) |
