WHEEL ALIGNMENT SPECIFICATIONS & PROCEDURES
Note. See SPECIFICATIONS & PROCEDURES article in WHEEL ALIGNMENT Section.
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) |
|---|---|
| Axle Hub Nut | 188-254 (255-344) |
| Brake Caliper Bolts | 25 (34) |
| Brake Caliper Anchor Bolts | 95 (129) |
| Lower Control Arm-To-Ball Joint Nut | 81-118 (110-160) |
| Lower Control Arm-To-Ball Joint Nut (1993) | 83-113 (113-153) |
| Lower Control Arm-To-Frame Bolt | 81-114 (110-155) |
| Lower Control Arm-To-Shock Nut | 118-162 (160-220) |
| Lower Control Arm-To-Tension Strut Nut | 89-118 (120-160) |
| Shock-To-Upper Mount Nut | 37-52 (50-71) |
| Stabilizer Bar Link-To-Spindle Nut | 41-55 (55-75) |
| Stabilizer Bar Link-To-Stabilizer Bar Nut | 41-55 (55-75) |
| Tension Strut-To-Frame Nut | 89-118 (120-160) |
| Tie Rod End-To-Spindle Nut (1) | 39-54 (53-73) |
| Upper Control Arm-To-Ball Joint Nut | 52-66 (70-90) |
| Upper Control Arm-To-Body Nut | 81-89 (110-120) |
| Upper Shock Mount-To-Body Nut | 16-23 (22-31) |
| Wheel Lug Nuts | 85-105 (115-142) |
| (1) Tighten to minimum torque, then continue to tighten to nearest cotter pin slot. | |
| (1) | Tighten to minimum torque, then continue to tighten to nearest cotter pin slot. |
TORQUE SPECIFICATIONS