Home/Ford/Taurus/Ford Taurus VI (2009-2012)/Repair manual/Fuel System/Fuel System - General Information: Component Locations
Contents Wiring diagrams Section: Fuel System All sections

Fuel System - General Information: Component Locations Ford Taurus VI

Fuel System 6 illustrations ~296 words

Special Tool(s)

SPECIAL TOOL REFERENCE Vehicle Communication Module (VCM) and Integrated Diagnostic System (IDS) software with appropriate hardware, or equivalent scan tool

Scheme 18

Scheme 18: Special Tool(s)

SPECIAL TOOL REFERENCE Adapter, Fuel Pressure Test 310-180 Fuel Pressure Test Kit 310-D009 (D95L-7211A) or equivalent

Scheme 19

Scheme 19: Special Tool(s)

Scheme 20

Scheme 20
WARNINGDo not smoke, carry lighted tobacco or have an open flame of any type when working on or near any fuel-related component. Highly flammable mixtures are always present and may be ignited. Failure to follow these instructions may result in serious personal injury.
WARNINGDo not carry personal electronic devices such as cell phones, pagers or audio equipment of any type when working on or near any fuel-related component. Highly flammable mixtures are always present and may be ignited. Failure to follow these instructions may result in serious personal injury.
WARNINGBefore working on or disconnecting any of the fuel tubes or fuel system components, relieve the fuel system pressure to prevent accidental spraying of fuel. Fuel in the fuel system remains under high pressure, even when the engine is not running. Failure to follow this instruction may result in serious personal injury.
WARNINGAlways disconnect the battery ground cable at the battery when working on an evaporative emission (EVAP) system or fuel-related component. Highly flammable mixtures are always present and may be ignited. Failure to follow these instructions may result in serious personal injury.
WARNINGWhen handling fuel, always observe fuel handling precautions and be prepared in the event of fuel spillage. Spilled fuel may be ignited by hot vehicle components or other ignition sources. Failure to follow these instructions may result in serious personal injury.

All vehicles

Pinpoint Test A

A3 All vehicles except Gasoline Turbocharged Direct Injection (GTDI)
  1. All vehicles except Gasoline Turbocharged Direct Injection (GTDI)
A4 3.5L
  1. 3.5L GTDI vehicles
A5 All vehicles
  1. All vehicles
A6 FP

SPECIAL TOOL REFERENCE Fuel Storage Tanker 164-R3202 or equivalent Wrench, Fuel Tank Sender Unit 310-123

Scheme 21

Scheme 21: Special Tool(s)

Scheme 22

Scheme 22
WARNINGDo not smoke, carry lighted tobacco or have an open flame of any type when working on or near any fuel-related component. Highly flammable mixtures are always present and may be ignited. Failure to follow these instructions may result in serious personal injury.
WARNINGDo not carry personal electronic devices such as cell phones, pagers or audio equipment of any type when working on or near any fuel-related component. Highly flammable mixtures are always present and may be ignited. Failure to follow these instructions may result in serious personal injury.
WARNINGWhen handling fuel, always observe fuel handling precautions and be prepared in the event of fuel spillage. Spilled fuel may be ignited by hot vehicle components or other ignition sources. Failure to follow these instructions may result in serious personal injury.
WARNINGAlways disconnect the battery ground cable at the battery when working on an evaporative emission (EVAP) system or fuel-related component. Highly flammable mixtures are always present and may be ignited. Failure to follow these instructions may result in serious personal injury.
WARNINGBefore working on or disconnecting any of the fuel tubes or fuel system components, relieve the fuel system pressure to prevent accidental spraying of fuel. Fuel in the fuel system remains under high pressure, even when the engine is not running. Failure to follow this instruction may result in serious personal injury.

Pinpoint Test A

A5 FP
A8 FP
A9 FP
A10 FP
A11 FP

SPECIAL TOOL REFERENCE Fuel Storage Tanker 164-R3202 or equivalent Wrench, Fuel Tank Sender Unit 310-123

WARNINGDo not smoke, carry lighted tobacco or have an open flame of any type when working on or near any fuel-related component. Highly flammable mixtures are always present and may be ignited. Failure to follow these instructions may result in serious personal injury.
WARNINGDo not carry personal electronic devices such as cell phones, pagers or audio equipment of any type when working on or near any fuel-related component. Highly flammable mixtures are always present and may be ignited. Failure to follow these instructions may result in serious personal injury.
WARNINGWhen handling fuel, always observe fuel handling precautions and be prepared in the event of fuel spillage. Spilled fuel may be ignited by hot vehicle components or other ignition sources. Failure to follow these instructions may result in serious personal injury.
WARNINGAlways disconnect the battery ground cable at the battery when working on an evaporative emission (EVAP) system or fuel-related component. Highly flammable mixtures are always present and may be ignited. Failure to follow these instructions may result in serious personal injury.
WARNINGBefore working on or disconnecting any of the fuel tubes or fuel system components, relieve the fuel system pressure to prevent accidental spraying of fuel. Fuel in the fuel system remains under high pressure, even when the engine is not running. Failure to follow this instruction may result in serious personal injury.

Pinpoint Test A

A5 FP
A8 FP
A9 FP

SPECIAL TOOL REFERENCE Spring Lock Coupling Disconnect Tool 310-S039 (T90T-9550-S) or equivalent

Scheme 23

Scheme 23: Special Tool(s)