GENERAL SPECIFICATIONS
| Item | Specification |
|---|---|
| Normal engine cranking speed | 140-220 rpm |
| Starter motor no load current draw | 60-80 amps |
| Starter motor normal load current draw | |
| Starter motor maximum load current draw | 800 amps |
| Starter motor minimum stall torque (at 5 volts) | 14.7 Nm (130 lb-in) |
| Starting circuit maximum voltage drop (engine at normal operating temperature) |
GENERAL SPECIFICATIONS
TORQUE SPECIFICATIONS
| Description | Nm |
|---|---|
| Starter motor bolts and stud bolts | 27 |
| Starter motor ground cable nut | 22 |
| Starter motor solenoid B-terminal nut (2.3L engine) | 12 |
| Starter motor solenoid B-terminal nut (4.0L engine) | 12 |
| Starter motor S-terminal nut (2.3L engine) | 5 |
| Starter motor S-terminal nut (4.0L engine) | 6 |
TORQUE SPECIFICATIONS
The starting system consists of the following
- Starter motor
- Starter relay
- Clutch Pedal Position (CPP) switch (manual transmission only)
- Digital Transmission Range (TR) sensor (automatic transmission only).