Home/Ford/Ranger/Ford Ranger II рестайлинг (2009-2011)/Repair manual/Fuel System/Fuel System - General Information: Specifications
Contents Section: Fuel System All sections

Fuel System - General Information: Specifications Ford Ranger II рестайлинг

Fuel System ~177 words

ITEM SPECIFICATION

ItemSpecificationFill Capacity
Motorcraft SAE 5W-20 Premium Synthetic Blend Motor Oil XO-5W20-QSP (US); Motorcraft SAE 5W-20 Super Premium Motor Oil CXO-5W20-LSP12 (Canada); or equivalentWSS-M2C930-A

ITEM SPECIFICATION

GENERAL SPECIFICATION CHART

ItemSpecification
Fuel Pressure
Engine running414-448 kPa (60-65 psi)
Key ON Engine OFF (KOEO)414-448 kPa (60-65 psi)
Fuel Tank Capacity
Midship - long wheel base77L (20.3 gal)
Midship - standard64L (17 gal)
Midship - SuperCab74L (19.5 gal)

GENERAL SPECIFICATION CHART

TORQUE SPECIFICATIONS CHART

DescriptionNm
Fuel tank filler pipe hose-to-fuel tank clamp3

TORQUE SPECIFICATIONS CHART

The fuel system consists of the following components

  1. Fuel rail
  2. Fuel injectors
  3. Fuel tank
  4. Fuel Pump (FP) (located in the fuel tank)
  5. Fuel filter (located in front of the fuel tank on LH frame rail)
  6. Fuel supply and return tubes

The vehicle is equipped with Sequential Multi-Port Fuel Injection (SFI).

Fuel delivery is accomplished through a Mechanical Returnless Fuel System (MRFS).

  1. The FP supplies the fuel injectors with pressurized fuel through the fuel rail.
  2. Fuel pressure is controlled by the fuel pressure regulator which is mounted to the FP support rods within the fuel tank.
  3. The fuel tubes route the fuel from the FP to the fuel rail.
  4. The fuel filter cleans the fuel delivered from the FP to the fuel rail.

For exploded view information of the fuel system, refer to Fuel Tank and Filler Pipe - Exploded View or Fuel Lines and Fuel Filter - Exploded View in FUEL TANK AND LINES .