TORQUE SPECIFICATIONS
| Description | Nm |
|---|---|
| Vehicle security module screws | 7 |
| Driver seat module (DSM) screws | 7 |
TORQUE SPECIFICATIONS
Powertrain Control Module (PCM)
The PCM is on the controller area network (CAN) and uses this network to communicate with the diagnostic tool. The PCM utilizes an internal termination resistor for normal interface with the CAN. Damage or loss of this termination resistor will result in intermittent operation and or failure of the entire CAN. The PCM controls the engine for better fuel economy, emissions control, failure mode detection and storage as well as all four wheel drive and speed control functions. For additional four wheel drive information, refer to FOUR-WHEEL DRIVE SYSTEMS - F150 PICKUP . For additional speed control information, refer to SPEED CONTROL - F150 PICKUP . Refer to INTRODUCTION - CNG, FLEX-FUEL & GASOLINE for diagnosis and testing of the PCM.
Anti-Lock Brake System (ABS) Module
The ABS module is on the CAN. The ABS module controls the brake pressure to the four wheels to keep the vehicle under control while braking. Refer to ANTI-LOCK CONTROL - F150 PICKUP .
Restraint Control Module (RCM)
The RCM is on the ISO 9141 communication network. The RCM controls the deployment of the air bags based on sensor input. Refer to AIR BAG RESTRAINT SYSTEMS - F150 PICKUP .
Electronic Automatic Temperature Control (EATC) Module
The EATC module is on the universal asynchronous receiver transmitter (UART)-based protocol (UBP) communication network. The EATC module controls automatic climate functions that maintain the vehicle interior temperature at a constant setting. Refer to CLIMATE CONTROL SYSTEM - F150 PICKUP .
Instrument Cluster
The instrument cluster is on both the CAN and the UBP communication networks. It is an analog face cluster with a digital odometer. The instrument cluster displays a variety of information. Refer to INFORMATION, GAUGES AND WARNING DEVICES - F150 PICKUP .
Driver Seat Module (DSM)
The DSM is on the UBP communication network. The DSM controls the positioning and programming of the driver seat and pedals. Refer to SEATING .
Vehicle Security Module
The vehicle security module is on the UBP communication network. The vehicle security module controls the keyless entry functions for the vehicle. Refer to HANDLES, LOCKS, LATCHES AND ENTRY SYSTEMS .
Parking Aid Module
The parking aid module is connected to the ISO 9141 communication network. The module controls sensors in the rear bumper that detect close objects when the vehicle is in reverse. Refer to INFORMATION, GAUGES AND WARNING DEVICES - F150 PICKUP .