GENERATOR SPECIFICATIONS
| Application | Specification | |
|---|---|---|
| Generator Amperage Rating | 110 Amps | |
| Generator Pulley Ratio (Generator Pulley Revolutions: Engine Revolutions) | 2.96:1 | |
| Load Test (1) | ||
| With Tester Load (2) | (3) | |
| Without Tester Load (4) | (5) | |
| No-Load Test (1) (2) | 13-15 Volts | |
| (1) All tests are performed with engine running at 2000 RPM. (2) All accessories off. (3) Adjust tester load bank to determine generator output. (4) Perform this test with engine running, A/C on, blower motor on high speed, and headlamps on high beam. (5) With accessories on, voltage should increase a minimum of 0.5 volt above base voltage. | ||
| (1) | All tests are performed with engine running at 2000 RPM. |
| (2) | All accessories off. |
| (3) | Adjust tester load bank to determine generator output. |
| (4) | Perform this test with engine running, A/C on, blower motor on high speed, and headlamps on high beam. |
| (5) | With accessories on, voltage should increase a minimum of 0.5 volt above base voltage. |
GENERATOR SPECIFICATIONS
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) |
|---|---|
| Generator Mounting Bolts | 18 (25) |
| INCH Lbs. (N.m) | |
| Battery Ground Cable Bolt | 89 (10) |
| Generator B+ Stud Nut | 71 (8) |
TORQUE SPECIFICATIONS