SPECIFICATIONS
| Item | Specification | Fill Capacity |
|---|---|---|
| MERCON® V Automatic Transmission Fluid XT-5-QM (or XT-5-QMC) (US); CXT-5-LM12 (Canada) | MERCON® V |
MATERIAL SPECIFICATIONS
| Description | Nm |
|---|---|
| Clevis-to-hydraulic lift cylinder rod bolts | 20 |
| Compression panel screws | 2 |
| Convertible top ajar switch screw | 9 |
| Convertible top frame No. 5 bow pivot bolts | 9 |
| Convertible top latch screws | 6 |
| Header form panel screws | 5 |
| Hydraulic fluid reservoir fill plug | 1 |
| Hydraulic lift cylinder bracket bolts | 20 |
| Hydraulic line-to-motor bolts | 14 |
| Hydraulic pump and motor assembly nuts | 4 |
| L-bracket bolts | 27 |
| Pivot bracket bolts | 48 |
| Pivot bracket-to-quarter panel bracket bolts | 11 |
| Weatherstrip retaining channel screws | 6 |
TORQUE SPECIFICATIONS
The convertible top consists of the following components
- Body Control Module B (BCM-B)
- Convertible top cover assembly
- Convertible top frame bows (1-5)
- Convertible top frame side rails
- Convertible top latches
- Header form panel
- Headliner
- Hydraulic pump and motor assembly
- Hydraulic lift cylinders with hydraulic lines
- Stay pads
- Weatherstrips
The convertible top is not adjustable, and is removed from the vehicle as an assembly. Once removed, the convertible top components can be disassembled, replaced and installed as necessary.
The convertible top cover assembly includes the rear window glass. The rear window glass is not removable, and the convertible top material and rear glass must be installed as an assembly.
The convertible top frame bows provide support for the convertible top cover assembly. The convertible top frame bows are the attachment points for the convertible top cover assembly.
The convertible top frame side rails form the LH and RH side structure of the convertible top assembly. The convertible top frame side rails support the convertible top frame bows and provide the attachment points for the LH and RH side convertible top cover assembly.
The convertible top latches secure the convertible top assembly to the windshield header when the convertible top assembly is in the raised position. The convertible top latches must be manually released before lowering the convertible top assembly.