GENERAL SPECIFICATIONS
| Item | Specification |
|---|---|
| Brake disc minimum thickness | 23.0 mm (0.905 in) |
| Brake pad maximum taper wear (in any direction) | 3.0 mm (0.118 in) |
| Brake pad minimum thickness | 3.0 mm (0.118 in) |
GENERAL SPECIFICATIONS
TORQUE SPECIFICATIONS
| Description | Nm |
|---|---|
| Bleeder screw | 8 |
| Brake caliper anchor plate bolts | 90 |
| Brake caliper flow bolt | 25 |
| Brake caliper guide pin bolts | 27 |
| Brake disc screws | 20 |
| Brake flexible hose bracket-to-body bolt | 20 |
| Brake flexible hose bracket-to-strut bolt | 20 |
| Brake tube fitting | 17 |
TORQUE SPECIFICATIONS
The front brake disc system consists of the following components
- Brake caliper anchor plate
- Brake caliper
- Brake disc
- Brake disc shield
- Brake flexible hose
When mechanical force is applied by the driver to the brake pedal, the force is converted into hydraulic pressure by the master cylinder. The hydraulic force is directed to the disc brake calipers and transferred to the brake pads. The brake pads are then forced against the brake friction surfaces by the brake caliper pistons. The friction of the brake pads on the brake disc causes the slowing of wheel rotation and the vehicle.
Refer to BRAKE SYSTEM - GENERAL INFORMATION article.