GENERAL SPECIFICATIONS
| Item | Specification |
|---|---|
| Magnetic Clutch | |
| Air gap between pulley and clutch disc | 0.3-0.6 mm (0.012-0.024 in) |
GENERAL SPECIFICATIONS
TORQUE SPECIFICATIONS
| Description | Nm |
|---|---|
| A/C compressor bolts | 25 |
| A/C compressor clutch disc and hub bolt | 14 |
| A/C compressor manifold and tube suction fitting nut | 15 |
| A/C compressor manifold bolt | 15 |
| A/C compressor nut | 25 |
| A/C compressor stud | 9 |
| A/C (peanut) fitting nuts | 15 |
| A/C pressure relief valve | 10 |
| Condenser inlet fitting nut | 15 |
| Heater core and evaporator core housing nuts | 9 |
| High-pressure Schrader-type valve | 2.5 |
| High-pressure service gauge port valve cap | 0.8 |
| Low-pressure Schrader-type valve | 1.8 |
| Low-pressure service gauge port valve cap | 0.8 |
| Secondary air injection pump bolts | 30 |
| Thermostatic expansion valve (TXV) fitting nut | 15 |
| TXV manifold and tube bracket bolt | 8 |
| Washer reservoir filler neck bolt | 6 |
TORQUE SPECIFICATIONS
See also:
• JACKING AND LIFTING