Home ReviewsRefund
Home/Ford/Freestyle/Ford Freestyle I (2004-2009)/Repair manual/Transfer Case/Transfer Case - Power Transfer Unit (Ptu): Maintenance
Contents Wiring diagrams Section: Transfer Case All sections

Transfer Case - Power Transfer Unit (Ptu): Maintenance Ford Freestyle I

Transfer Case ~109 words

Power Transfer Unit (PTU) Draining and Filling

ItemSpecification
SAE 75W-90 Specialty Power Transfer Unit Fluid XY-75W90-PTUGL-5

MATERIAL SPECIFICATION

Note. The power transfer unit (PTU) is lubed for life and is not to be drained unless a leak is suspected. To drain the PTU fluid, the PTU must be removed from the vehicle. For additional information, refer to POWER TRANSFER UNIT (PTU) .

  1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to «JACKING & LIFTING»(ref-255244) .
  2. Remove the fill plug and washer. Fill the PTU with axle lubricant to the specified level.
  3. Install a new washer and fill plug. Tighten to 49 N.m (36 lb-ft).

More articles — Transfer Case - Power Transfer Unit (Ptu)