TORQUE SPECIFICATIONS
| Description | N.m |
|---|---|
| Load floor support bracket bolts | 18 |
TORQUE SPECIFICATIONS
GENERAL SPECIFICATIONS
| Item | Specification |
|---|---|
| Fuel tank capacity (Montego/Five Hundred) | 76 L (20 gallons) |
| Fuel tank capacity (Freestyle) | 72 L (19 gallons) |
| Fuel Pressure | FUEL PRESSURE SPECIFICATIONS |
| Lubricant | |
| Motorcraft SAE 5W-20 Premium Synthetic Blend Motor Oil XO-5W20-QSP (US); Motorcraft SAE 5W-20 Super Premium Motor Oil CXO-5W20-LSP12 (Canada); or equivalent | WSS-MC930-A |
GENERAL SPECIFICATIONS
| WARNING | Do not smoke or carry lighted tobacco or open flame of any type when working on or near any fuel-related components. Highly flammable mixtures are always present and may be ignited. Failure to follow these instructions can result in personal injury. Do not carry personal electronic devices such as cell phones, pagers or audio equipment of any type when working on or near any fuel-related components. Highly flammable mixtures are always present and may be ignited. Failure to follow these instructions can result in personal injury. |
The fuel system consists of the
- fuel tank.
- fuel tank filler pipe.
- fuel pump module.
- fuel level sensor.
- fuel tubes.
- fuel filter.
- fuel injectors.
- fuel rail.
- fuel tank pressure transducer.
- inertia fuel shutoff (IFS) switch.
- fuel injection pressure temperature sensor.
The vehicle
- uses an electronic returnless fuel system, has a dual-container (saddle-type) fuel tank, has a fuel level sensor in the right fuel tank half.
- has a fuel pump module that supplies fuel under pressure to the fuel rail.
- has a fuel filter located on the passenger side in front of the fuel tank.
- is equipped with a sequential multi-port fuel injection (MFI) system.
- uses separately controlled fuel injectors for each cylinder. The fuel injectors are mounted to the intake manifold.
- fuel injectors are supplied with pressurized fuel from the fuel pump module to the fuel rail.
- fuel injection rail pressure is controlled by the electronic fuel delivery module which is enabled by the powertrain control module (PCM).
- has a fuel tank filler pipe assembly, which cannot be modified in any way and is serviced only by installation of a new fuel tank filler pipe assembly.
- has a fuel injection pressure sensor, which monitors the fuel pressure during running and key on/engine off conditions.
- has an inertia fuel shutoff (IFS) switch located in the passenger side footwell that shuts off fuel in the event of a collision.
SPECIAL TOOL DESCRIPTION Vehicle Communication Module (VCM) and Integrated Diagnostic System (IDS) software with appropriate hardware, or equivalent scan tool
See also:
• FUEL PRESSURE SPECIFICATIONS