GENERAL SPECIFICATIONS
| Item | Specification |
|---|---|
| Magnetic Clutch | |
| Air gap between pulley and clutch plate | 0.35-0.75 mm (0.014-0.030 in) |
| Lubricant | |
| PAG Refrigerant Compressor Oil (R-134a Systems) YN-12-D | WSH-M1C231-B |
| Thermal Limiter Sealant | |
| Silicone Gasket and Sealant TA-30 | WSE-M4G323-A4 |
GENERAL SPECIFICATIONS
TORQUE SPECIFICATIONS
| Description | N.m |
|---|---|
| Low-pressure service gauge port valve cap | 0.8 |
| High-pressure service gauge port valve cap | 0.8 |
| Low-pressure Schrader-type valve | 1.8 |
| High-pressure Schrader-type valve | 2.5 |
| Compressor nuts | 25 |
| Compressor studs | 9 |
| Compressor bolts | 25 |
| Compressor manifold bolt | 21 |
| A/C compressor clutch disc and hub nut | 26 |
| Heater core and evaporator core housing bolts | 9 |
| Condenser mounting studs | 6 |
| A/C (peanut) fitting nuts | 8 |
| Receiver/drier bracket bolts | 9 |
| Roll restrictor cross beam bolts | 55 |
| Roll restrictor bracket bolt | 48 |
| Coolant reservoir bolts | 9 |
| Thermostatic expansion valve (TXV) manifold and tube bracket bolt | 8 |
| TXV manifold bolt | 8 |
| TXV bolts | 8 |
TORQUE SPECIFICATIONS