GENERAL SPECIFICATIONS
| Item | Specification |
|---|---|
| 6K poly V belt |
GENERAL SPECIFICATIONS
TORQUE SPECIFICATIONS
| Description | Nm |
|---|---|
| Belt tensioner bolt | 45 |
TORQUE SPECIFICATIONS
Scheme 1
This vehicle is equipped with
- a V-ribbed serpentine accessory drive belt.
- an automatic drive belt tensioner. New drive belts should be of the same type as originally installed. Drive belt chirp is a regularly occurring chirping noise that occurs due to
- pulley misalignment.
- excessive pulley runout.
- worn out belt.
- incorrect tension. It can be a result of a damaged pulley or an incorrectly installed pulley that was not correctly aligned. To correct drive belt chirp
- determine the area from where the noise comes.
- check each of the pulleys in that area with a straightedge to the crankshaft pulley for front accessory drive.
- look for the accessory pulley to be out of position in the fore/aft direction or at an angle to the straightedge.
- inspect the drive belt.
- inspect the belt tensioner. Drive belt squeal is an intermittent noise that occurs when the drive belt slips on a pulley during certain conditions such as
- engine start-up.
- rapid engine acceleration.
- A/C clutch engagement.