MATERIAL SPECIFICATIONS
| Item | Specification | Fill Capacity |
|---|---|---|
| High Performance DOT 3 Motor Vehicle Brake Fluid PM-1-C (US); CPM-1-C (Canada) | WSS-M6C62-A or WSS-M6C65-A1 | 630 ml (1.33 pt) |
| Silicone Brake Caliper Grease and Dielectric Compound XG-3-A | ESE-M1C171-A | |
| Silicone Gasket and Sealant TA-30 | WSE-M4G323-A4 |
MATERIAL SPECIFICATIONS
GENERAL SPECIFICATIONS
| Description | Mm | Inch |
|---|---|---|
| Brake drum discard diameter | 204 | 8.03 |
| Brake lining discard thickness | 1 | 0.039 |
GENERAL SPECIFICATIONS
TORQUE SPECIFICATIONS
| Description | Nm |
|---|---|
| Brake tube-to-brake hose fitting | 18 |
| Brake tube-to-wheel cylinder fitting | 15 |
| Rear wheel speed sensor bolt | 9 |
| Wheel cylinder bolts | 12 |
| Wheel hub nut | 235 |
| Wheel spindle bolts | 70 |
TORQUE SPECIFICATIONS
The drum brake system consists of the following components
- Brake backing plate
- Brake drum
- Brake flexible hose
- Brake shoe hardware kit
- Brake shoes
- Self-adjuster
- Wheel cylinder
When mechanical force is applied by the driver to the brake pedal, the force is converted into hydraulic pressure by the master cylinder. The hydraulic force is directed to the wheel cylinders moving the brake shoes against the friction surface of the brake drum. The friction of the brake shoes on the brake drum causes the slowing or stopping of wheel rotation and the vehicle.
Refer to BRAKE SYSTEM - GENERAL INFORMATION .
See also:
• JACKING AND LIFTING