Home/Ford/Focus/Ford Focus II рестайлинг (2007-2011)/Repair manual/Horns/Horn System: Removal & Installation

Contents

Section: Horns

All sections

Horn System: Removal & Installation Ford Focus II рестайлинг

Horns

REMOVAL AND INSTALLATION

With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to «JACKING AND LIFTING»(ref-357126) article.
Disconnect the electrical connector.
Remove the horn bracket bolt and the horn. To install, tighten to 9 Nm (79 lb-in).
To install, reverse the removal procedure.