Removal & Installation (2.0L Zetec-E)
| CAUTION | When battery is disconnected, vehicle computer and memory systems may lose memory data. Driveability problems may exist until computer systems have completed a relearn cycle. See COMPUTER RELEARN PROCEDURES article in GENERAL INFORMATION before disconnecting battery. Before testing starter, ensure transmission is in Park or Neutral. |
Disconnect negative battery cable. Raise and support vehicle. Disconnect starter solenoid wire connections. Remove 3 starter motor mounting bolts. Remove starter motor. To install, reverse removal procedure. Ensure negative battery cable is installed with starter mounting bolt. Tighten bolts to specification. See TORQUE SPECIFICATIONS .
Removal & Installation (2.0L SPI)
Disconnect negative battery cable. Remove air cleaner outlet tube. Remove 3 starter motor mounting bolts. Raise and support vehicle. Disconnect starter solenoid wire connections. Remove starter motor. To install, reverse removal procedure. Tighten bolts to specification. See TORQUE SPECIFICATIONS .