Torque Specifications
| Description | Part Number | Torque |
|---|---|---|
| Flap heat shield bolt | W710616 | 11 Nm (97 lb-in) |
| Front subframe forward bolts | W714470 | 200 Nm (148 lb-ft) |
| Front subframe rearward bolts | W714471 | 200 Nm (148 lb-ft) |
| Inner tie rod | 3280 | 90 Nm (66 lb-ft) |
| Outer tie-rod end nuts | W520215 | 150 Nm (111 lb-ft) |
| Roll restrictor-to-subframe bolt | W712850 | 90 Nm (66 lb-ft) |
| Stabilizer bar link upper nuts | W713968 | 150 Nm (111 lb-ft) |
| Stamped heat shield bolt | W505252 | 9 Nm (80 lb-in) |
| Steering column shaft-to-steering gear bolt | W712961 | 26 Nm (19 lb-ft) |
| Steering gear bolts | W714710 | 165 Nm (122 lb-ft) |
| Subframe support bracket bolts | W710999 | 55 Nm (41 lb-ft) |
| Tie-rod jam nuts | W713882 (also part of 3280 ) | 63 Nm (46 lb-ft) |
| Wiring harness-to-steering gear bolt | W705661 | 11 Nm (97 lb-in) |
TORQUE SPECIFICATIONS
Pinpoint Test M: DTCs C1B00, C200B, C200C, C200D, U0300, U2011 and U3000 : Steering Column Mounted EPAS - Steering Angle Sensor, Steering Shaft Torque Sensor 1, Steering Shaft Torque Sensor 2, Motor and Control Module - Failure or Erratic
Note. This pinpoint test is intended to diagnose vehicles with steering column mounted EPAS systems only. Do not use this pinpoint test to diagnose vehicles with steering gear mounted EPAS systems.