GENERAL SPECIFICATIONS
| Item | Specification |
|---|---|
| Normal engine cranking speed | 140-220 rpm |
| Starter motor no load current draw | 60-80 amps |
| Starter motor normal load current draw | 130-220 amps |
| Starter motor maximum load current draw | 800 amps |
| Starter motor minimum stall torque (at 5 volts) | 14.7 Nm (10.8 lb-ft) |
| Starter circuit maximum voltage drop (engine at normal operating temperature) | 0.5 volt |
GENERAL SPECIFICATIONS
TORQUE SPECIFICATIONS
| Description | Nm |
|---|---|
| Ground cable nut - 4.0L SOHC | 20 |
| Starter motor bolts and stud bolts | 25 |
| Starter solenoid B-terminal nut | 12 |
| Starter solenoid S-terminal nut | 6 |
TORQUE SPECIFICATIONS
The starting system consists of the following
- Starter motor
- Starter solenoid
- Starter drive
- Starter relay
- Ignition switch
- Digital transmission range (TR) sensor
- Battery
The function of the starting system is to crank the engine at a speed fast enough to permit the engine to start.
Special Tools Illustration Tool Name Tool Number 73 Digital Multimeter 105-R0051 or equivalent SABRE Premium Battery and Electrical System Tester 010-00736 or equivalent
See also:
• AUTOMATIC TRANSAXLE/TRANSMISSION - 5R55S