GENERAL SPECIFICATIONS
| Item | Specification |
|---|---|
| Evaporator Core Orifice | |
| Color with auxiliary climate control | Black |
| Color without auxiliary climate control | Red |
| Magnetic Clutch | |
| Air gap clearance | 0.35-0.65 mm (0.014-0.026 in) |
| Refrigerant Lubricant and Capacity | |
| PAG Refrigerant Compressor Oil (R-134a Systems) YN-12-D | WSH-M1C231-B |
| Capacity without auxiliary climate control | 266 ml (9 fl. oz.) |
| Capacity with auxiliary climate control | 473 ml (16 fl. oz.) |
| Refrigerant and Capacity | |
| R-134a Refrigerant YN-19 (US); CYN-16-P or CYN-16-R (Canada) | WSH-M17B19-A |
| Capacity without auxiliary climate control | 0.88 kg (31 oz.) |
| Capacity with auxiliary climate control | 1.33 kg (47 oz.) |
| Heater Core and Evaporator Core Housing Sealant | |
| RTV Silicone Sealant TA-31 | |
GENERAL SPECIFICATIONS
TORQUE SPECIFICATIONS
| Description | Nm |
|---|---|
| A/C clutch disc and hub bolt | 13 |
| A/C compressor bolt | 25 |
| A/C compressor fitting nuts | 15 |
| A/C compressor nuts | 25 |
| A/C compressor studs (4.0L) | 4 |
| A/C compressor studs (4.6L) | 14 |
| A/C line bracket nut at dash panel | 6 |
| A/C pressure relief valve | 10 |
| Compressor-to-condenser discharge line bracket nut (4.0L) | 7 |
| Compressor-to-condenser discharge line bracket nut (4.6L) | 9 |
| Condenser bolts | 12 |
| Condenser fitting nuts | 8 |
| Condenser-to-evaporator line bracket nut | 7 |
| Coolant bottle bolts | 9 |
| Coolant expansion tank bolts | 7 |
| Cooling module bolts | 12 |
| Dash panel A/C line bracket nut | 11 |
| Evaporator core orifice access fitting | 24 |
| Fender splash shield A/C line bracket nut | 11 |
| Heater core and evaporator core housing nuts | 9 |
| High-pressure Schrader-type valve | 2.5 |
| High-pressure service gauge port valve cap | 0.8 |
| Low-pressure Schrader-type valve | 1.8 |
| Low-pressure service gauge port valve cap | 0.8 |
| Low-side service port stem bracket bolt | 11 |
| Suction accumulator bolt | 11 |
| Suction accumulator fitting nuts | 8 |
| Suction accumulator stud | 11 |
| Suction accumulator-to- compressor line bracket bolt | 11 |
| Suction accumulator-to- compressor line bracket nut | 7 |
| Suction accumulator-to- compressor line middle fitting nut | 8 |
TORQUE SPECIFICATIONS