REMOVAL & INSTALLATION
| WARNING | When battery is disconnected, vehicle computer and memory systems may lose memory data. Driveability problems may exist until computer systems have completed a relearn cycle. See COMPUTER RELEARN PROCEDURES article in GENERAL INFORMATION before disconnecting battery. |
Disconnect negative battery cable. Disconnect inside mirror harness connector. Rotate mirror counterclockwise until vertical. Twist mirror assembly horizontally until tube assembly bottoms out and spring releases off mounting button. To install, reverse removal procedure.
Disconnect negative battery cable. Remove door panel. Remove speaker and disconnect speaker harness connector. Remove mirror mounting hole cover. Disconnect mirror wiring harness connector. Remove mirror attaching nuts. Remove mirror assembly while guiding wiring and connector through hole in door. To install, reverse removal procedure. Tighten nuts to approximately 53 INCH lbs. (6 N.m).
Manufacturer does not provide removal and installation procedures.