Removal
| CAUTION | Prior to removal of the four-wheel drive (4WD) control module, it is necessary to upload module configuration information to a diagnostic tool. This information needs to be downloaded into the new module once installed. For additional information, refer to MODULE CONFIGURATION . |
Scheme 24
Scheme 25
- Disconnect the battery ground cable. For additional information, refer to «BATTERY, MOUNTING AND CABLES»(ref-209935) .
- Remove the LH B-pillar interior trim panel. For additional information, refer to «INTERIOR TRIM AND ORNAMENTATION»(ref-209953) .
- Disconnect the connectors from the 4WD module.
- Remove the bolts and the 4WD module.
- To install, reverse the removal procedure.