GENERAL SPECIFICATIONS
| Item | Specification |
|---|---|
| Brake Pads | |
| Brake pad minimum thickness | 3.0 mm (0.118 inch) |
| Brake pad maximum thickness variation (pad-to-pad) | 2.0 mm (0.079 inch) |
| Brake pad maximum taper wear (in any direction) | 3.0 mm (0.118 inch) |
| Brake Disc | |
| Front brake disc minimum thickness | 27.0 mm (1.06 in) |
| Rear brake disc minimum thickness | 19.0 mm (0.74 in) |
| Minimum thickness to machine front brake disc | 28.3 mm (1.11 inch) |
| Minimum thickness to machine rear brake disc | 19.6 mm (0.77 inch) |
| Lubricant | |
| High Performance DOT 3 Motor Vehicle Brake Fluid PM-1 (Canada CPM-1) | ESA-M6C25-A |
| High Temperature Nickel Anti-Seize Lubricant XL-2 (Canada CXG-2-B) | ESE-M12A4-A |
| Silicone Brake Caliper Grease and Dielectric Compound XG-3 | ESE-M1C171-A |
| Brake Parts Cleaner PM-4 | |
GENERAL SPECIFICATIONS
TIGHTENING TORQUE SPECIFICATIONS
| Description | Nm |
|---|---|
| Front disc brake caliper bleeder screw | 12-18 |
| Front master cylinder brake tube | 22-28 |
| Rear disc brake caliper bleeder screw | 17-24 |
| Rear master cylinder brake tube | 15-20 |
TIGHTENING TORQUE SPECIFICATIONS
The vehicle is equipped with a vacuum-assisted power braking system. For additional information, refer to DISC .
The braking system is a front-to-rear split hydraulic system. For additional information, refer to DISC .
The front wheel brakes utilize a dual piston brake caliper and disc brake system. For additional information, refer to DISC .
The rear brakes utilize a single piston brake caliper and disc brake system. For additional information, refer to DISC .
The parking brake system is a mechanical system that activates a shoe-and-drum system within the brake disc. For additional information, refer to DISC .
A 4-wheel anti-lock brake system (4WABS) is standard equipment. For additional information, refer to ANTI-LOCK CONTROL or ANTI-LOCK CONTROL-TRACTION CONTROL & STABILITY ASSIST .
See also:
• ACCELERATION CONTROL
• COMPONENT TESTING